Product Description for MXR MC404 CAE Crybaby Dual Inductor Wah Pedal and Gator Cases GTR-PWR-1MAX 9V Power Supply Combo Pack Package Includes : 1 X MXR MC404 CAE Crybaby Dual Inductor Wah Pedal 1 X Gator Cases GTR-PWR-1MAX 9V Power Supply Combo Pack MXR MC404 CAE Crybaby Dual Inductor Wah Pedal
The CAE Wah allows you to switch between two distinctly-voiced Fasel Inductors with a built-in Boost/Line Driver circuit, internal Q and gain controls, and bright status LEDs on each side of the pedal.
The MC404 CAE Wah was developed by Bob Bradshaw of Custom Audio Electronics and the Cry Baby design team with the goal of creating a highly versatile wah-wah of top-grade components. It features dual Fasel inductors with two distinct voices (high-end emphasis or low to mid resonance), and a built-in MXR MC401 Boost/LineDriver adds even more flexibility. Choose between inductors and turn the boost on or off with the side-mounted kickswitches; bright LEDs on each side of the wah indicate operation status. The MC404 boasts true hardwire bypass, a long-life CTS potentiometer, and internal pots for Q and gain adjustments. Gator Cases GTR-PWR-1MAX 9V Power Supply Combo Pack
9V DC Power Adapter and 8-Output Daisy Chain Cable Combo pack
The MC404 CAE Wah is powered by one 9-volt battery (accessed via bottom of pedal), a 9-volt AC Adapter such as the Dunlop ECB003/ECB003EU or a DC Brick power supply
Setup Instructions
Run a shielded instrument cable from your guitar to the MC404’s INSTRUMENT jack and run another instrument cable from the MC404’s AMPLIFIER jack to your amp.
To turn the pedal on/off, push the toe of the pedal down until you feel a “click.” Illuminated green LED indicates “on.”
For a classic Cry Baby sound, engage the yellow Fasel inductor by pushing the INDUCTOR switch to its “in” position (indicated by illuminated yellow LED).
For a deeper wah sound with increased fundamental, engage the red Fasel inductor by setting the INDUCTOR switch to its “out” position (indicated by illuminated red LED).
To boost your wah signal, push in the BOOST switch (indicated by illuminated blue LED) and use the BOOST VOLUME knob to set desired boost level (up to +20dB).
Use internal TRIMPOTS to adjust the Q of each Fasel inductor—rotate clockwise for a narrower bandpass or counter clockwise for a wider bandpass.
Located under the rocker at the heel of the pedal is an adjustable torque clutch that allows the amount of resistance the rocker has to being moved. Turn clockwise to increas resistance or counterclockwise to decrease resistance. (Wrench included).
Controls
BOOST VOLUME knob controls amount of gain added by BOOST switch
UPPER TRIMPOT controls Q of yellow inductor
LOWER TRIMPOT controls Q of red inductor
INDUCTOR switch toggles red/yellow inductors
BOOST switch engages boost level set by BOOST VOLUME knob
Specifications
Impedance
Input : 1 MΩ
Output : <10 kΩ
Center Freq. (Yellow Inductor)
Heel Down : 400 Hz
Toe Down : 1.9 kHz to 2.2 kHz
Center Freq. (Red Inductor)
Heel Down : 255 Hz to 355 Hz
Toe Down : 1.3 kHz to 1.5 kHz
Maximum Level
Input : -6 dBV
Output : +8 dBV
Maximum Gain
Heel Down : +16 dB
Toe Down : +16 dB
Noise Floor
Heel Down : -85.5 dBV
Toe Down : -82.0 dBV
Bypass : True Bypass
Current Draw : <6.3 m
Gator Cases GTR-PWR-1MAX 9V Power Supply Combo Pack
9V DC Power Adapter and 8-Output Daisy Chain Cable Combo Pack
Slim Design Frees up Space on Power Strip by Occupying One Outlet
Works with Optional Female-to-Male Daisy Chain Adapter Cable for Connecting Multiple Pedals
Single Output Supplies Maximum of 1700mA to Power Fully Loaded Pedalboard
AC Power Input with Variable Voltage Between 115V/230V (50-60Hz) for International Use
Thank you for contacting us. We have received your request for Special Order for MXR MC404 CAE Crybaby Dual Inductor Wah Pedal + Gator 9V Power Supply Combo. Our team will contact you soon
Login and Registration Form