Product Description for MXR M83 Bass Chorus Deluxe w/ Flanger Pedal and Gator Cases GTR-PWR-1MAX 9V Power Supply Combo Pack Package Includes : 1 X MXR M83 Bass Chorus Deluxe w/ Flanger Pedal 1 X Gator Cases GTR-PWR-1MAX 9V Power Supply Combo Pack MXR M83 Bass Chorus Deluxe w/ Flanger Pedal
The MXR Bass Chorus Deluxe is powered by pure analog bucket-brigade technology, serving up shimmering, liquid chorus and swooshing, metallic flanger effects while preserving the punch and fundamental of your low end.
The Bass Chorus Deluxe features top-mounted Flanger and X-Over buttons with LED status indicators. In X-Over Mode, modulation in low frequencies is decreased at 100Hz—perfect for playing upper register chords, melodies and fills while keeping the low end in tune. With Bass and Treble controls you can cut or boost lows and highs and shape the tonal character of the effect. For a wide stereo sound, select the TRS (tip-ring-sleeve) Stereo Hardwire Bypass Mode via an internal switch. In this mode, you can use a TRS to TS (tip-sleeve) Y-splitter cable to send the effect signal to two different amplifiers, allowing the modulation to move from left to right.
The Bass Chorus Deluxe joins the ranks of award-winning pedals in the MXR Bass Innovations line, each designed by bass players for bass players. Gator Cases GTR-PWR-1MAX 9V Power Supply Combo Pack
9V DC Power Adapter and 8-Output Daisy Chain Cable Combo pack
Separate Bass and Treble controls for detailed tone sculpting
X-OVER mode for increased low end clarity
Constant Headroom Technology
Power
The MXR Bass Chorus Deluxe is powered by one 9 volt battery(remove bottom plate to install) or a 9 volt power supply such as the Dunlop ECB003/ECB003E AC adapter.
Directions
Run a cable from your bass to the Bass Chorus Deluxe’s Input jack and run another cable from the Bass Chorus Deluxe’s Output jack to your amplifier.
Chorus is the default mode. To use Flanger mode, press the FLANGER switch. To engage X-Over mode and decrease modulation on low end frequencies, press the X-OVER switch.
Start with all controls at 12 o’clock.
Turn the effect on by depressing the footswitch.
Rotate the BASS knob clockwise to boost low end frequencies or counterclockwise to cut them.
Rotate the TREBLE knob clockwise to boost high end frequencies or counterclockwise to cut them.
Rotate the INTENSITY knob clockwise to increase modulation intensity or counterclockwise to decrease it.
Rotate the RATE knob clockwise to increase modulation speed or counterclockwise to decrease it.
Rotate the WIDTH knob clockwise to increase the modulation sweep range or counterclockwise to decrease it.
An internal switch selects TRS (tip-ring-sleeve) Stereo Hardwire bypass or Mono True bypass. Factory set to Mono True bypass.
Specifications
Input Impedance : 2 MΩ
Output Impedance
TIP (Mono) : 600 Ω
RING (Stereo) : 3.3 KΩ
Max Input Level* : 1 kHz/+10 dBV
Max Output Level : +13 dBV
Frequency Response : 20 Hz to 20 kHz/±1 dB
Signal to Noise Ratio* : >96 dBV
Tone Controls (Delay Signal Only) : +8 dB, -11 dB, 100 Hz (BASS)
-2 dB, 100 Hz (Center Position BASS)
±14 dB, 10 kHz (TREBLE)
X-OVER Control : +7.5 dB, 20 Hz/+3 dB, 100 Hz (Dry Signal) -18 dB, 20 Hz/-3 dB, 160 Hz (Delay Signal)Rate Control 0.1 Hz to 10 Hz
Maximum Delay Time : 12 ms
Minimum Delay Time : 400 µs
Delay Noise Reduction : 2:1 ratio
Bypass
Mono : True Hardwire
Stereo : Hardwired
Current Draw : 30 mA
Power Supply : 9 volts DC
Gator Cases GTR-PWR-1MAX 9V Power Supply Combo Pack
9V DC Power Adapter and 8-Output Daisy Chain Cable Combo Pack
Slim Design Frees up Space on Power Strip by Occupying One Outlet
Works with Optional Female-to-Male Daisy Chain Adapter Cable for Connecting Multiple Pedals
Single Output Supplies Maximum of 1700mA to Power Fully Loaded Pedalboard
AC Power Input with Variable Voltage Between 115V/230V (50-60Hz) for International Use
Thank you for contacting us. We have received your request for Special Order for MXR M83 Bass Chorus Deluxe w/ Flanger Pedal + Gator 9V Power Supply Combo. Our team will contact you soon
Login and Registration Form