For more than four decades, the MXR Phase 90 has been a mainstay on the pedal boards of millions of players around the globe. This little orange box went on to become the sole icon of its effect category, and countless legendary riffs have benefitted from the sonic qualities of this pedal. No matter the genre or instrument, the Phase 90 has been there through it all to add its distinctly lush voice to a musician's tone palette. With the twist of the Rate knob, you can take the Phase 90's warm modulation from subtle, spatial shimmer to all-out high velocity swooshing.
Add’s shimmery velocity to lead licks and a thick swoosh to chords
Works well with bass, keyboards and even vocals
True bypass
Power
The MXR Phase 90 is powered by one 9-volt battery (remove bottom plate to install), a 9-volt AC Adapter such as the Dunlop ECB003/ECB003EU or a DC Brick power supply.
Directions
Run a cable from your guitar to the Phase 90’s INPUT jack and run another cable from the Phase 90’s OUTPUT jack to your amplifier.
Start with the SPEED control at 12 o’clock.
Turn the effect on by depressing the footswitch.
Rotate the SPEED knob clockwise for a faster phase effect or counterclockwise for a slower phase effect.
Specifications
Input Impedance : 1 MΩ
Output Impedance : 10 kΩ
Nominal Intput Level : -20 dBV
Nominal Output Level : -20 dBV
Noise Floor* : -96 dBV
Bypass True : Hardwire
Current Draw : 5 mA
Power Supply : 9 volts DC
Controls
SPEED knob controls overall effect rate
FOOTSWITCH toggles effect on/ bypass (red LED indicates on)
Login and Registration Form