Internet Co. Sound It! 8 Pro - Mac Audio Editing, Mastering And Processing

Editing & Processing

Cut And Paste With Cross Fade For Reducing Junction NoisePro

This cross fade function is specially designed for reducing the dissonant click noises easily which is generated from a discontinuous waveform after frequent cut or paste. This helps you to free to have to use restoration effects for reducing noise after cut or paste editing.

Editing multiple files

Multiple files can be opened at the same time and edit them with each other. One file contains one track audio data, does not support multiple track construction.

Markers

Markers are used to search the waveform positions when you try and edit or play, set dividing points and define the top or end point of the target area for editing such as cut, copy, trim and so on. You can put markers easily while playing and editing. There are special marker's types such as dividing point, a start or end point for extracting and chapter markers. All markers have each marker type and comment, and they are listed and editable at the Marker List Window.

Auto Silence Detection

This function allows you to add division or region markers after detecting silence automatically. You can divide a recording data from a analog disk or tape including one single track into a number of tracks.

Merge

Level and balance of copied data can be controlled and previewed before merging with existing data.

Create A New File From Selected Area

Easy to create as a new file with dragging selected area to the outside of the current Edit Window.

Edit Each Sample

Using Pen Tool, it is very easy to edit each level of sampling points freely to remove momentary noise which any noise reduction or restoration effects are unable to clean.

Other Edit Functions

Cut / Copy / Paste / Trim / Erase / Undo / Redo / Insert a file / Snap to Zero Crossing

Remove DC Offset

DC offset caused by the leak voltage from the output stage of some audio interfaces can be removed easily from the recording data. DC offset is not audible in itself but it may cause dissonant noise after editing or processing with each repetition.

Precise Normalize And Gain Control

Normalize and Gain are controlled precisely with calculating a level (dB) to one decimal places.

Other Processing

Fade-In/Out, Reverse, Insert Blank, Audio Format Conversion (Bit Resolution/Sampling Rate/Channel), Invert Phase, Swap Channel, Gain (Level) Control, Normalize

High-Resolution AudioPro

High-resolution PCM (DXD) maximum 768kHz / 32Bit INT and DSD 256 / 128 / 64 formats are supported. You can load, record, edit, process and save these file types.

 You can edit and process DSD converted to PCM then save as DSD.

 DSD Native Recording / PlaybackPro

You can do DSD Native Recording and Playback without converting to PCM format.

Supported DSD audio formats

DSD64 (2.82MHz/3.07MHz), DSD128 (5.64MHz/6.14MHz), DSD256 (11.28MHz/12.28MHz)

 The audio interface or AD/DA converter, compatible with DSD Native Recording / Playback.

 Proper ASIO driver are needed.

Restoration

Sound it! come with three types of Sonnox restoration plug-ins, De-Noiser, De-Clicker and De-Buzzer can accurately remove clicks, crackles and buzzes. Sonnox plug-ins are used by professionals worldwide for mixing and mastering music, film, television, radio and live sound.

Bundled Effect Plug-Ins

Sound it! 8 Pro bundles 49 powerful effect plug-ins, including the high-end Sonnox effects, EQ, Limiter and Reverb, also fully compatible to native 64bit Operating systems and VST3.

Basic bundles 25 effect plug-ins.

Vst2/3 and Audio Units (AU) Support

Audio Units (AU) are available on only Macintosh edition.

Mastering & Post-Production

Mastering tools, Loudness MeterPro that is utilized in broadcasting and a professional Limiter by Sonnox are included in Sound it! 8 Pro. Giving you the ability to combine with many other functions will be further effective in cleaning up and mastering your creative works.

Loudness Meter confirms to Broadcast Standards, EBU R128 and ARIB TR B32.

Automation EnvelopePro

You can draw automation envelopes of Volume and Pan and adjust them continuously.

Batch Processing

Batch Processing is very easy to use when affecting all of the same processing to all files included in the same folder. Available functions in the Batch Processing are Insertion of effects in the MixerPro, Gain control, Normalize, Auto Level, Audio format conversion, fade-in/fade-out, and file format conversion.

DDP CreationPro

You can create DDP files and reflect ISRC and EAN to them. DDP is a format for specifying the content of CD and commonly used for delivery of disc premasters for duplication.

Music CD Burning / Ripping

You can create music CD with adjusting levels and equalization. Also pre-gap time in 10ms (Basic:1s) increments gap-less and crossfade settings between tracks can be configurable.

Sound it! 8 Pro supports CD-TEXT.

CD-TEXT can be shown by CD-TEXT compatible player.

For burning music CD with CD-TEXT, CD-TEXT compatible disc drive (RAW+96 or RAW+96(P) compatible) is needed.

Create ACID Files

Easy to create ACID files, specifying a tempo, a beat or a root note name and saving with the WAV (Linear PCM) formats. These files are used in any other DAWsoftwares compatible with ACID files.

"THIS IS NON-REFUNDABLE SOFTWARE DOWNLOAD! (NOT A PHYSICAL ITEM)"