Rave Generation OTTX

Rave Generation OTTX

Rave Generation OTTX

Multiband dynamics processor combining aggressive upward and downward compression with per-band waveshaping. Features 3-band Linkwitz-Riley crossover, per-band Inflator curves, parallel compression mix, and Smart Clip 0dB ceiling limiting. Software Download (NO HARDWARE INCLUDED)
$39.63
In stock
SKU
XCH-RAV-1540-1016

OTTX is an advanced multiband dynamics processor by Rave Generation, inspired by the legendary OTT-style compression essential in modern electronic music. It delivers aggressive upward and downward compression across three bands with per-band Inflator-style waveshaping for harmonic richness.

Beyond classic OTT behavior, OTTX adds per-band threshold and ratio controls for fine-tuned dynamics shaping, a phase-aligned Mix knob for parallel compression, Smooth mode for mastering-friendly compression, and Smart Clip limiting to keep your output clean at 0dB. Equally at home on individual tracks, drum busses, or full mixes.

Multiband Upward/Downward Compression

  • Three-band OTT-style dynamics processing with independent upward expansion (bringing up quiet details) and downward compression (taming peaks). The Depth control scales overall intensity, while Upward and Downward controls let you balance between lifting quiet content and squashing loud peaks.

Per-Band Inflator Waveshaping

  • Each band features an independent Curve control inspired by the Sonnox/Oxford Inflator algorithm. This adds harmonic richness and perceived loudness without traditional clipping artifacts. Use subtle settings for warmth or push harder for aggressive saturation. Pro tip: Set all Curves to 100% and blend in with Depth and Mix for rich harmonic saturation.

Per-Band Threshold & Ratio Controls

  • Fine-tune the compression character of each band independently. Threshold controls set where compression kicks in, while Ratio controls determine how aggressively peaks are reduced. Dial in different behaviors for low-end punch, midrange presence, and high-end sparkle.

Smooth Mode

  • Enable Smooth for a more transparent, mastering-friendly compression character. This switches from peak detection to RMS averaging and applies soft-knee compression curves, resulting in gentler gain reduction that's ideal for mix bus duties or when you want the OTT vibe without the aggression.

Sidechain High-Pass (SC HP)

  • The SC HP control filters low frequencies from the compressor's detection circuit (0–200 Hz). This prevents sub-bass content from triggering excessive gain reduction, eliminating unwanted pumping while maintaining tight low-end control.

Smart Clip 0dB Limiting

  • Enable Smart Clip to prevent output from exceeding digital full-scale. A soft-clipper followed by a hard limiter ensures clean peaks without harsh digital overs—perfect for pushing levels while maintaining headroom.

Phase-Aligned Mix Control

  • The Mix knob provides true parallel compression with proper phase alignment. Unlike simple dry/wet blends, the mix is applied per-band inside the compression algorithm, ensuring the dry and wet signals remain perfectly phase-coherent at all settings.

24dB/Octave Crossovers

  • Linkwitz-Riley filters split your signal into three bands with steep 24dB/octave slopes, ensuring clean separation between low, mid, and high frequencies without phase issues at the crossover points.
  • Depth (%) – Master compression intensity (0–100%).
  • Attack / Release (%) – Global envelope timing modifiers (0–200%). 100% = default OTT timing.
  • In Gain / Out Gain (dB) – Input drive and output level (–24 to +24 dB).
  • Upward / Downward (%) – Balance between lifting quiet content and squashing peaks.
  • Low/Mid/High Gain (dB) – Per-band makeup gain (–40 to +6 dB).
  • Low/Mid/High Thresh (%) – Per-band threshold offset (0–200%).
  • Low/Mid/High Ratio (%) – Per-band downward compression intensity (0–200%).
  • Low/Mid/High Curve (%) – Per-band Inflator saturation (0–100%).
  • Low/Mid Freq / Mid/High Freq (Hz) – Crossover frequencies.
  • SC HP (Hz) – Sidechain high-pass filter (0–200 Hz). Set to 0 to disable.
  • Smooth (off/on) – RMS detection with soft knee for smoother compression.
  • Mix (%) – Phase-aligned dry/wet blend (0–100%).
  • Smart Clip (off/on) – Soft-clip limiter at 0dB ceiling.
SKU XCH-RAV-1540-1016
Brand Rave Generation
More Information
Item Returns Sorry, the item can't be returned