The MXR Wylde Audio Chorus is powered by a single 9-volt battery (remove bottom plate to install), a 9-volt AC adapter such as the Dunlop ECB003, or an MXR Brick Series power supply.
Directions
Run a cable from your guitar to the WA38’s INPUT jack and run another cable from the WA38’s OUTPUT jack to your amplifier. Optional Stereo Mode: run an additional cable from the THRU OUTPUT jack to the input of a second amp. Using this jack automatically sends the delayed signal only to the MONO output jack when the effect is on and outputs a buffered copy of the input signal.
Start with all knobs at 1o’clock. Turn the effect on by depressing the footswitch.
Rotate the DEPTH knob clockwise to increase the intensity of the effect or counterclockwise to decrease it.
Rotate the RATE knob clockwise to increase the speed of the chorus effect or counterclockwise to decrease it.
Rotate the LEVEL knob clockwise to increase overall effect volume or counterclockwise to decrease it.
Rotate the LOW knob clockwise to retain more low end or counterclockwise to cut more low end.
Rotate the HIGH knob clockwise to retain more high end or counterclockwise to cut more low end.
Footswitch toggles effect on/bypass (blue LED indicates on)
Thank you for contacting us. We have received your request for Special Order for MXR WA38 Wylde Audio Zakk Wylde Signature Chorus Pedal - Open Box. Our team will contact you soon
Login and Registration Form