Product Description for MXR M80 Bass Direct Box with Distortion and Gator Cases GTR-PWR-1MAX 9V Power Supply Combo Pack Package Includes : 1 X MXR M80 Bass Direct Box with Distortion 1 X Gator Cases GTR-PWR-1MAX 9V Power Supply Combo Pack MXR M80 Bass Direct Box with Distortion
The Bass D.I.+ features a D.I., separate clean and distortion channels, an array of controls to fine-tune your sound, an a noise gate trigger control to eliminate hum and hiss.
Finally, all the essentials in one tough little box. You need a serious D.I. for playing live and laying down killer tracks. You've got to have a preamp and finely tuned EQ to add punch to your tones. And you definitely can't do without some rich, custom distortion. This one-of-a-kind pedal gives you the whole deal in a bomb-proof enclosure that will survive even the most out of control gigs-and players. Built with the highest quality components, the M-80 can give you eve everything from warmth and transparency to a volcanic roar, without making you scroll through menu screens or an indecipherable manual. Engage the color switch for some sweet preset EQ, then tweak your tone with three band control. Dial in your ideal distortion with the gain knob and blend just the right amount into your clean signal, then kick it on and off at will. The adjustable noise gate pours on the sustain and cuts out hum and hiss. With XLR and parallel 1/4 outputs and a phantom power switch, you'll never have a problem delivering your choice new tones. Gator Cases GTR-PWR-1MAX 9V Power Supply Combo Pack
9V DC Power Adapter and 8-Output Daisy Chain Cable Combo pack
An incredibly flexible Bass D.I.+, Clean and Distortion effects
Run direct to the PA or straight to the mixing board for pure tone
A smart “noise gate” and optimized EQ help you find the sweetspot in the mix!
Directions
Set all controls to their middle position and set switches to their off position (all LEDs unlit).
Run a cable from your bass to the Input jack of the Bass D.I.and run another cable from the Bass D.I.+ Output jack to your amplifier.
To use the D.I. (Direct Input) function, run a balanced line (microphone cable) from the Bass D.I.+ Direct Output to your mixing board or PA input.
Turn on the Bass D.I.+ Clean channel effect by depressing the Effect footswitch (Effect LED lit).
Adjust the Clean Volume to the desired level, such as to match or boost your bypassed, effect off signal.
Push in the Color switch to engage a clean preset EQ designed to color your bass tone with added punch, definition and clarity.
Depress the Distortion footswitch to engage the Distortion channel (Distortion LED lit).
Use the Gain control to set the amount of distortion, the Blend control to set a mix between the clean preset EQ and distortion effects, and Volume control to set the distortion channel’s output level.
Push in the Gate switch to activate the adjustable noise gate with Smart Gate technology. Set the Trigger knob threshold low (counter-clockwise) to kill hum and hiss from the distortion signal while sustaining desired signals without premature, audible cutoff. To create a dynamic distortion effect, set the Trigger to higher (clockwise) Trigger threshold settings so that the gate only opens during loud passages. The Gate’s yellow status LED turns off when the gate is opened and on when the gate is closed.
Use the Bass, Mid and Treble controls to shape Clean and Distortion effect tones.
The Parallel Output can be used to connect to a tuner or any other parallel processing device.
The Bass D.I.+ can be phantompowered through its Direct Output jack from a phantom powercapable mixing console. Push the Phantom/Ground switch to its down position to enable phantom power or up position to ground lift the Direct Output connection and remove noisy ground loops.
PHANTOM/ GROUND enables Phantom Power or Ground Lift
LEFT FOOTSWITCH toggles Effects on/bypass (red LED=on)
RIGHT FOOTSWITCH toggles Distortion channel in/out (red LED at top of unit indicates Distortion channel active)
BASS-MID-TREBLE EQ KNOBS are active when effect is on
COLOR SWITCH activates a preset EQ optimized for bass (switch depressed down)
CLEAN VOLUME and COLOR controls are active only in Clean Channel mode (Effect Footswitchon and Distortion off)
DISTORTION CHANNEL MODE (Effect and DistortionFootswitches on) providescontrols for Gain to setdistortion level, Blend tomix distorted/ clean signal,and Volume
GATE SWITCH and TRIGGER KNOB work interactively toprovide an adjustable noisegate. With Gate active (switchdepressed down), the Trigger Knob sets the noise floor threshold, or sensitivity, to cut hum and hiss from thedistortion signal
Power
The MXR M80 Bass D.I. + requires a single 9 volt alkaline battery, Phantom Power from mixing board (through microphone cable) or a Dunlop ECB003 AC adapter (ECB003E in Europe) or a Dunlop DCB10 DC Brick power supply. Gator Cases GTR-PWR-1MAX 9V Power Supply Combo Pack
9V DC Power Adapter and 8-Output Daisy Chain Cable Combo Pack
Slim Design Frees up Space on Power Strip by Occupying One Outlet
Works with Optional Female-to-Male Daisy Chain Adapter Cable for Connecting Multiple Pedals
Single Output Supplies Maximum of 1700mA to Power Fully Loaded Pedalboard
AC Power Input with Variable Voltage Between 115V/230V (50-60Hz) for International Use
MXR M80 Bass Direct Box with Distortion + Gator 9V Power Supply Combo
Thank you for contacting us. We have received your request for Special Order for MXR M80 Bass Direct Box with Distortion + Gator 9V Power Supply Combo. Our team will contact you soon
Login and Registration Form