Skip to the beginning of the images gallery

MXR M148 Micro Chorus Pedal

Micro Chorus Guitar Effects Pedal

$125.99

In stock

SKU

MXR-M148

Details

The Micro Chorus allows you to quickly dial up a stunning range of old-school bucket-brigade chorus textures with a single Rate control.

With its simple operation and stellar analog tone-the MXR Micro Chorus joins the ranks of MXR Classics such as the Phase 90, Dyna Comp Compressor, and the Micro Amp. This '80s reissue delivers a stunning range of rich chorus textures, from sparkly watery shimmers to intense rotating speaker simulation with a twist of the Rate control. The Micro Chorus is designed with old-school bucket brigade technology for warm analog tone and features true bypass for pure guitar tone when the pedal is off. Its road-worthy hardware and components are housed in a space saving Phase 90 sized box.

Features

Adds rich chorus textures, from sparkly watery shimmers to intense rotating speaker simulation
All analog circuitry with bucket brigade technology for warm analog tone
True bypass with LED
Joins the ranks of MXR Classics such as the Phase 90, Dyna Comp and Micro Amp

Directions

Run a cable from your guitar to the Micro Chorus’ INPUT jack and run another cable from the Micro Chorus’ OUTPUT jack to your amplifier.
Turn the Micro Chorus effect on by depressing the footswitch; the red LED will illuminate, indicating that the effect is activated.
Turn the RATE knob clockwise to increase the chorus speed towards a watery shimmer, counterclockwise for a slower rotating sound.

Specifications

Input Impedance : 1 MΩ
Output Impedance : 1 kΩ, 1 kHz
Max Input Level : -5 dBV, 500Hz
Max Output Level : +8 dBV
Rate Control : 0.25 Hz, 7.5 Hz
Noise Floor* : -89 dBV
Delay Time : 4.2 ms, 6.8 ms
Frequency Response
Delayed Signal : 20 Hz to 4.5 kHz
Dry Signal : 20 Hz to 20 kHz
Bypass : True Hardwire
Current Draw : 5 mA
Power Supply : 9 volt DC

Power

The MXR Micro Chorus can be powered by one 9-volt battery (accessed by removing the pedal bottom plate), a 9-volt AC adapter such as the Dunlop ECB003/ECB003E, or a DC Brick power supply.

Controls