Kemper Profiler PowerRack Guitar Profiling Amp Head

Skip to the beginning of the images gallery

Kemper Profiler PowerRack Guitar Profiling Amp Head

Guitar Profiling Amp Power Rack

$1,999.00

Out of stock

SKU

KEM-PROFILERPR

Details

Both the Rack and the Head (black version only) are available with a build in Class D power amp. It produces 600 Watt 8 Ohm or 300 Watt 16 Ohm. The power amp was designed by renowned IcePower in Denmark. It offers prestine sound quality running linear speakers, as well as running classic guitar speaker cabinets.

The Class D technique makes the most energy efficient power amp solution, emitting only a minimum of heat. That reduces the need of heat sinks, as well as the size and weight. The combination with the Kemper Profiler turns the PowerHead and the PowerRack into a super smart and compact all-in solution. The Power Head weights a little over 6kg.

If required, you can switch off the build-in power amp, converting your powered Profiler into a line level unit for recording purposes.

Features

Rack/PowerRack:

Height : 13.9 cm (5.47 inches),
3 HE (3 RU)
Width : 48.3 cm (19 inches)
Depth : 22 cm (8.66 inches)

POWER AMP

PowerHead and PowerRack:
600 Watts at 8 Ohm
300 Watts at 16 Ohm

DIGITAL INPUTS AND OUTPUTS

S/PDIF In/Out 44.1 kHz (24 bit)
with RCA Phone connectors (Master only)

ANALOG INPUTS

Front Input:

¼ inch TS unbalanced, dynamic range >108dB, impedance 1 MegOhm

Alternative Input:

¼ inch TRS balanced with ground lift, dynamic range =105dB

Return:

XLR balanced, ¼ inch balanced with ground lift, dynamic range =105dB

ANALOG OUTPUTS

Master L and R Outputs:
XLR balanced, ¼ inch TS unbalanced with ground lift max. output level : XLR +22dBu, TS +16dBu
Monitor Output:
¼ inch TS unbalanced with ground lift max. output level : +16dBu
Direct Output/Send:
¼ inch TS unbalanced with ground lift max. output level : +16dBu
Output Dynamic Range:
>108 dB
Dedicated Headphone Output:
¼ inch TRS stereo, 33Ohm

CONTROL AND DATA INTERFACES

Midi :

5-pin DIN commectors for In/Out/Thru

Switch/Pedal :

Two 1/4 inch TRS, each for
mono/stereo switch or expression pedal
(10kOhm min, 100kOhm max. impedance)

Network :

RJ45 connector

USB :

USB 2.0 (FS) compatible device,
USB-A and USB-B connectors

ELECTRICAL REQUIREMENTS

Line Voltage :

Head/Rack 100-240V. AC, max. 0.5. A
PowerHead/PowerRack 100-125 or 190-245V. AC, max. 10. A

Frequency :

50Hz to 60Hz, single phase

ENVIRONMENTAL REQUIREMENTS

Operating Temperature :10° to 35° C (50° to 95° F)
Non-operating Temperature :-20° to 47° C (-4° to 116° F)
Relative Humidity :5% to 95% non-condensing
Maximum Altitudet :3000 m (10,000 feet)

ELECTRICAL APPROVALS

FCC Verification procedure – 47CFR §15.101
Other Class B digital devices and peripherals
EN 55022 Class B : 2006+A1:2007
EN 61000-3-2 : 2006 + A1:2009 + A2:2009
EN 61000-3-3 : 2008EN55024:1998 + A1:2001+ A2:2003
EN 55024 : 1998 + A1:2001 + A2:2003, 2010

SKU	KEM-PROFILERPR
Brand	Kemper
Weight	15.000000

Return Policy

More Information
Refund period	35 days

Kemper Profiler PowerRack Guitar Profiling Amp Head

CALL US NOW

Kemper Profiler PowerRack Guitar Profiling Amp Head

Special Order For