FABERAPPS Advanced Tool Set License for SignalScope XM v12

• Multi-channel, real-time analysis of signals coming from the Mac’s audio interface hardware
• Multi-channel, real-time analysis of AIF, CAF, or WAV audio files
• Assign engineering units to your input signals and calibrate external transducers for accurate measurements.
• Assign input channel units and sensitivities for individual USB Audio devices.
• Connect lab-grade microphones and sensors to your Mac, iPad, or iPhone with suitable interface hardware for precise measurements.
• SignalScope offers enhanced support for select hardware from Digiducer, The Modal Shop, and miniDSP.
• Nominal acoustic sensitivities included for iPhone and iPad built-in microphones, voltage sensitivities for headset input (including the standard Lightning-to-headset adapter).
• Manually switch between available audio input and output sources.
• Load microphone frequency response data (FRD) and apply frequency response correction (FRC) to FFT-based measurements.
• Manually adjust audio sample rates, even up to 768 kHz, depending on input hardware.
• Save acquired measurement data to CSV, tab-delimited ASCII text, or MAT files.
• Save time domain data to AIF, CAF, or WAV audio files.
• Save high-resolution analyzer display images to PDF files.
• Retrieve your data files from your device via Files (iCloud Drive), iTunes File Sharing, or through a web browser on another device. Files may also be opened in other compatible apps (e.g. Mail, Notes, Numbers, Dropbox, etc).

Pro Features

• User-defined custom metadata in saved audio and data files
• Data logging support in the Level Meter, Octave Analyzer, and Noise Dosimeter
• Percentile exceeded sound levels in the Level Meter and Octave Analyzer
• NC, RNC, and NR references curves, NC, SIL, and NR values in the Octave Analyzer
• Voltage decibel levels can be displayed in dBV or dBu
• Load data from multiple data files to generate average curves in the FFT, Octave, and Dual FFT tools.

Input/Output

• Supported Hardware: Any Core Audio compatible device, includes USB Audio Class compliant devices connected to Mac, iPad, or iPhone via a suitable USB adapter

Input Device

• Maximum Supported Input Channels: 32
• Maximum Supported Sample Rate: 768 kHz
• Supported Units: Digital Full Scale (FS), Volts (V), and pascals (Pa, only when a known microphone device is selected—units are then synchronized with the first input channel)
• Built-in Accelerometer: iPad, iPhone only

Enhanced Third Party Hardware Support

• Digiducer: USB Digital Accelerometers
• Data Read from Device:
• Serial Number
• Calibrated Accelerometer Sensitivity
• Calibration Date (year, month, day)
• Automatic Sensitivity Adjustment, Based on Sample Rate
• The Modal Shop: 485B39 2-channel ICP-USB Signal Conditioner
• Data Read from Device:
• Serial Number
• Calibrated Voltage Sensitivity
• Calibration Date (year, month, day)
• Automatic Sensitivity Adjustment, Based on Sample Rate
• miniDSP: UMIK-1, UMIK-2
• User Prompted for Device Serial Number
• Data Downloaded from miniDSP.com:
• Acoustic Sensitivity
• Frequency Response Data
• miniDSP: EARS Headphone Test Fixture
• User Prompted for Device Serial Number
• Data Downloaded from miniDSP.com:
• Acoustic Sensitivity

Frequency Response Data

• HEQ : headphone compensation for flat EQ target
• HPN : original headphone compensation
• IDF : IEM diffuse field compensation
• RAW : no headphone compensation (mic cal only)

Data Read from Device

• Hardware Gain Setting
• Dayton Audio : UMM-6 USB Measurement Microphone
• User Prompted for Device Serial Number
• Data Downloaded from daytonaudio.com:
• Acoustic Sensitivity
• Frequency Response Data
• Dayton Audio: iMM-6C iDevice USB-C Calibrated Microphone
• User Prompted for Device Serial Number
• Data Downloaded from daytonaudio.com:
• Acoustic Sensitivity
• Frequency Response Data

Output Device

• Maximum Supported Output Channels : 32
• Maximum Supported Sample Rate : 768 kHz

Input Channels

• Maximum Sample Resolution : 32 bits, data processed internally with single (32-bit) or double (64-bit) precision
• Supported Units per Channel : Digital Full Scale (FS), pascals (Pa), Volts (V), Amperes (A), Gravity (g, m/s^2), Force (lbf, N)
• Additional Units for Vibration : Velocity (ips, mm/s), Displacement (mils, mm), applied in tools that support integration of acceleration to velocity or velocity to displacement
• Sensitivity Calibration : Manual entry, automatic calculation from reference input level
• Frequency Response Compensation (FRC)
• Frequency Response Data (FRD) Source : URL, File
• FRD File Format : FRD (.frd, .txt, or .csv), or CSV/MAT/TXT files generated by FFT or Dual FFT Analyzer tools in SignalScope

DC Offset Correction

• Apply DC Blocking Filter : Enable/Disable
• DC Correction : User-defined DC correction value
• The blocking filter and correction options are mutually exclusive

Output Channels

• Maximum Sample Resolution : 32 bits, data processed internally with single (32-bit) or double (64-bit) precision
• Supported Units per Channel : Digital Full Scale (FS), pascals (Pa), Volts (V), Amperes (A), Gravity (g, m/s^2), Force (lbf, N)
• Sensitivity Calibration : Manual entry, automatic calculation from reference input level
• Audio Play-through : Enable/Disable (requires the same device to be selected for input and output on Mac)

At Launch

• Restore Hardware Sample Rate : Enable/Disable
• Restore Hardware Output Gain : Enable/Disable

Options

• Built-in Web Server (HTTP)
• Run Server : Enable/Disable (disabled by default)
• Preferred Server Port : User defined
• File Management : Built-in browser for files saved within the app's sandbox documents directory
• Supported operations (context-dependent) : Delete, Load, Preview, Export, Show in Finder (Mac only)
• Prevent Screen Auto-lock : Enable/Disable
• Run In Background : Enable/Disable
• Voltage dB Reference (Pro Feature) : dBV, dBu
• Color Schemes (background color) : Black, Blue, White, Gray
• Plot Line Thickness : 1.0, 2.0, 3.0
• Color Map (for bar or surface graphs) : Classic, Inferno, Magma, Plasma, Viridis, White on Black, Black on White, Green on White, Green on Blue