Darkglass Electronics Hyper Luminal Compressor Pedal - Ltd. Ed. Black

Blend

• Mixes the clean and effected signals. Unlike our distortions, it is placed before the Output control. So the Hyper Luminal can also be used as a transparent booster with this control at minimum.

Time

• Sets the time constants (Attack and Release). You can use the Darkglass Suite to fine tune and custom map the time constants, you can also assign different behaviours for each Mode.

Output

• Sets the overall output volume of the unit.

Compression

• Sets the overall amount of compression. This control also affects the internal makeup gain.

Ratio

• Adjusts the amount of compression.

Mode

• Selects the unit’s Mode (BUS, FET, or SYM).

Dimensions

• Width: 75 mm / 3″
• Length: 111 mm/ 4¼″
• Height: 43 mm / 1¾″

Touch Sensors

Ratio

• Adjust the amount of compression ratio.
• BUS: 2:1, 4:1, 10:1, 15:1
• FET: 2:1, 4:1, 8:1, 20:1, “ALL IN”
• SYM: Based on different settings of the Super Symmetry · 115 GeV Compressor.

Mode

• Selects between three different models:
• BUS: Modeled after the Solid State Logic ® Bus compressor.
• FET: Inspired by the legendary 1176®.
• SYM: Our discontinued Super Symmetry · 115 GeV Compressor.

Input & Outputs

Output

• Connect from the ¼” Output jack to the input of your amplifier or another effects pedal.

Input

• Connect your instrument or output from your pedal board to the ¼” mono jack.

USB

• A Micro USB B connector allows you to connect the pedal to PC/Mac to set Time settings, parameters, and future firmware upgrades via the Darkglass Suite.

9V DC

• Only use a regulated 9V DC adapter with a center-negative plug.