Celestion Truvox 0615 6" Woofer w/Ferrite Magnet - 8 ohm - Open Box

• Lightest weight in product class
• Excellent drop-in replacement/upgrade model for 6in mid/bass applications
• FEA optimised magnet assembly
• Double roll surround
• Robust pressed steel chassis with front and rear mounting gaskets
• Nominal diameter : 152mm / 6in
• Power rating : 150W
• Continuous power rating : 300W
• Rated impedance : 8Ω
• Sensitivity : 93dB
• Frequency range : 80-5000Hz
• Chassis type : Pressed steel
• Magnet type : Ferrite
• Voice coil diameter : 38mm / 1.5in
• Voice coil material : Round copper
• Former material : Polyimide
• Cone material : Kevlar loaded paper
• Surround material : Cloth-sealed
• Suspension : Single
• Gap height (Hg) : 6mm / 0.24in
• VC winding height (Hvc) : 10mm / 0.39in

Parameters

• Sd : 154.54cm2/23.95in2
• Fs : 89.6Hz
• Mms : 10.584g/0.373in
• Qms : 5.535
• Qes : 0.516
• Qts : 0.472
• Re : 5.59Ω
• Vas : 7.44l/0.26ft3
• BI : 8.032Tm
• Cms : 0.298
• Le (at 1kHz) : 0.369mH
• Xmax : 3.5mm / 1.38in

Mounting Information

• Overall diameter : 167.4mm / 6.59in
• Overall depth : 65.5mm / 2.6in
• Cut-out diameter : 143.5mm / 5.65in
• Mounting hole dimensions : 8x5.5mm / 0.31x0.22in
• Number of mounting holes : 4
• Mounting hole PCD : 153.5-158.5mm / 6.04-6.24in

Frequency Response and Impedance Curves

• Power rating: Tested for two hours using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance. Loudspeaker tested in free air.
• Continuous power rating : Defined as 3dB greater than the AES rating.
• Sensitivity : Measured on axis at 1W, 1m in 2π anechoic environment.
• Parameters : Measured after unit subjected to pre-conditioning signal.
• Xmax : 0.5(Hvc-Hg) + 0.25Hg