AT4051B - Side Angle

Audio-Technica AT4051b

Audio-Technica AT4051b

Cardioid Condenser Microphone
$769.00
In stock
SKU
ATC-AT4051B

Ideal for professional recording and critical applications in broadcast, this versatile studio performer may be used with confidence in a wide variety of professional miking applications. Featuring direct-coupled balanced outputs for clean signals in high-output conditions, the microphone is totally free of the distortion associated with conventional transformer-coupled outputs. Its fast response to transients contributes to the open, transparent reproduction of even the most difficult-to-capture instruments. The microphone is fully RoHS-compliant – free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS).

The AT4051b consists of two modular subassemblies: an AT4900b-48 body and an AT4051b-EL cardioid head capsule.Additional interchangeable capsules are available in omnidirectional (AT4049b-EL) and hypercardioid (AT4053b-EL).

  • Specially engineered to meet the most critical acoustic requirements of professional recording, broadcast and sound reinforcement
  • High front-to-back rejection ratio—cardioid polar pattern improves isolation of desired sound source
  • Direct-coupled, balanced output results in a clean signal even under high-output conditions
  • Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
  • Switchable 80 Hz hi-pass filter and 10 dB pad
  • Rugged turned-brass microphone housing for enduring dependability
  • State-of-the-art design and manufacturing techniques ensure compliance with A-T’s stringent consistency and reliability standards
  • RoHS-compliant – free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS)
  • ELEMENT : Externally polarized (DC bias) capacitor
  • POLAR PATTERN : Cardioid
  • FREQUENCY RESPONSE : 20-20,000 Hz
  • LOW FREQUENCY ROLL-OFF : 80 Hz, 12 dB/octave
  • OPEN CIRCUIT SENSITIVITY : -34 dB (19.9 mV) re 1V at 1 Pa
  • IMPEDANCE : 50 ohms
  • MAXIMUM INPUT SOUND LEVEL : 145 dB SPL, 1 kHz at 1% T.H.D.;
  • 155 dB SPL:, with 10 dB pad (nominal)
  • NOISE : 16 dB SPL
  • DYNAMIC RANGE (TYPICAL) : 129 dB, 1 kHz at Max SPL
  • SIGNAL-TO-NOISE RATIO : 78 dB, 1 kHz at 1 Pa
  • PHANTOM POWER REQUIREMENTS : 48V DC, 4.8 mA typical
  • SWITCH : Flat, roll-off; 10 dB pad (nominal)
  • WEIGHT : 126 g (4.4 oz)
  • DIMENSIONS : 155.0 mm (6.10") long, 21.0 mm (0.83") maximum body diameter
  • OUTPUT CONNECTOR : Integral 3-pin XLRM-type
  • OPTIONAL INTERCHANGEABLE ELEMENTS : AT4049b-EL (omnidirectional); AT4053b-EL (hypercardioid)
  • ACCESSORIES FURNISHED :AT8405a stand clamp for 5/8"-27 threaded stands; windscreen; protective carrying case
  • AUDIO-TECHNICA CASE STYLE : S1
SKU ATC-AT4051B
Brand Audio-Technica
Weight 1.100000
More Information
Refund period 35 days
We found other products you might like!