0 $0.00

TASCAM DR-60D mkII Portable Recorder

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

20k-giveaway-rebateblock

TASCAM DR-60D mkII Portable Recorder

Portable 4-track recorder designed for use with a digital camera

Brand New

$199.99

Availability: In stock now

"Don't See The Deal You Want?" Request A Deal

  • Google Playstore
  • Apple store

Product Description for the TASCAM DR-60D mkII Portable Recorder

The DR-60DmkII is the next generation of 4-track solid-state recording, based on TASCAM’s decades of recording innovation. The upgraded HDDA microphone preamps provide up to 64dB of gain, capturing every nuance of a performance. Up to four channels at a time can be recorded to the internal SD Card, at up to 96kHz/24-bit WAV file resolution. Two of the mic inputs utilize locking XLR connectors with 48V phantom power, the other two use an 1/8” stereo connector for wireless and lavaliere microphones.

A Camera Output sends the mic mix to the camera for later synchronization, and a Camera Input is provided for monitoring playback. An additional headphone out and line out assist the crew during filming. The DR-60DmkII is designed for low-noise operation, including soft touch buttons and dedicated gain controls.

Multiple recording modes are available on the DR-60DmkII. Four-Channel Mode records all four microphone inputs. Dual Recording is an alternate setting, capturing a copy of your audio at a lower level for a distortion-free safety track. Menus and operation are well laid out, owing to decades of innovative recording design.

Reach beyond the limited performance of your camera’s audio to capture the other half of your film. At a cost less than competing preamps, the TASCAM DR-60DmkII is the ultimate 4-track recorder designed for filmmakers, television, live events and web broadcast.

Features

  • Record to SD/SDHC card (Up to 32GB)
  • Simultaneously record up to 4 tracks
  • Record Mode:MONO, STEREO, DUAL MONO, DUAL STEREO, 4-CHANNEL
  • Recording format:44.1/48/96kHz 16/24bit (WAV/BWF)
  • TASCAM original HDDA microphone preamps
  • Recording levels can be adjusted independently for the 1/L, 2/R and 3-4 inputs
  • Two XLR/TRS inputs support +4dBu line level input and phantom power (24 or 48VDC on XLRF)
  • Plug-in power and high-output mic input supported on inputs 3-4
  • CAMERA OUT connector for output from the DR-60D's mixer (adjustable gain)
  • CAMERA IN connector for sound monitoring from the camera
  • Independent adjustable LINE OUT and HEADPHONE jacks for high-quality sound output
  • 50mW/ch headphone output
  • Tripod mounting socket (bottom) and DSLR mounting screw attachment (top)
  • Handles protect the screen and can be used to attach a shoulder strap
  • Soft-Touch Rubber Keys for silent operation
  • HOLD switch to prevent accidental operation
  • QUICK button feature for easy access to various functions
  • 128x64 pixel LCD with backlight
  • USB 2.0 connection for high-speed transferring of files
  • Mini USB cable included
  • Operates on 4-AA batteries, an AC adapter (sold separately) or USB bus power
  • Can extend battery life with BP-6AA battery pack (sold separately)
  • Dedicated remote control jack for the wired RC-10 remote control or RC-3F footswitch (both sold separately)
  • Internal mixer: PAN and LEVEL controls
  • Low cut filter(40/80/120Hz)
  • Limiter (1/L and 2/R can be selected for link-operation)
  • Delay function for microphone distance adjustment (up to 150ms)
  • M-S decode function
  • Slate tone generator (AUTO/MANUAL)
  • Selectable duration of slate tone from four positions (0.5/1/2/3 sec, when auto-generated)
  • Selectable slate tone generation. 3 positions: OFF/HEAD/HEAD+TAIL, when auto-generated
  • File name format can be set to use a user-defined word or date
  • Dual-recording function allows two files to be recorded simultaneously at different levels
  • Auto-record function can automatically start and stop recording at set level
  • Pre-recording function allows the unit to record a 2 second sound buffer before recording is activated
  • Self-timer function for solo recording
  • New file starts recording automatically without interruption when maximum file size is reached
  • Track incrementing function allows a recording to be split by creating a new file when desired
  • Jump back and play function
  • Equalizer function for playback, and level alignment function to enhance the perceived overall sound pressure
  • Resume function to memorize the playback position before the unit is turned off
  • MARK function up to 99 points per audio track
  • DIVIDE function

Dr-60dmkii

  • Recording media : SD card(64MB to 2GB), SDHC card(4GB to 32GB)

Recording format

  • WAV : 44.1/48/96kHz, 16/24bit
  • BWF : 44.1/48/96kHz, 16/24bit
  • Number of channels : 4-channel (stereo x2)

Analog audio input : 

  • 1/L, 2/R connectors  
  • Connector : XLR-3-31 (1:GND, 2:HOT, 3:COLD)/6.3mm(1/4")TRS standard jack
  • Set to "MIC / MIC+PHANTOM" : 
  • Input impedance : 2k ohms
  • Phantom power : 48V +/-4V(10mA/CH) / 24V +/-4V(10mA/CH)
  • Maximum input level : 0dBu
  • Minimum input level : -72dBu
  • MIC input gain : TRIM MAX
  • LOW : +11dB
  • MID : +36dB
  • HIGH : +52dB
  • HIGH+PLUS : +64dB

Set to “LINE”  

  • Input impedance : 10k ohms or more
  • Standard input level : +4dBu
  • Maximum input level : +24dBu

3-4 connector   

  • Connector : 3.5mm (1/8") stereo mini jack (this connector can be supplied plug-in power)
  • Input impedance : 10k ohms
  • Maximum input level : +10dBV
  • Minimum input level : -50dBV
  • MIC input gain : TRIM MAX
  • LOW : +3dB
  • HIGH : +26dB
  • HI + PLUS : +38dB
  • CAMERA IN connector : 
  • Connector : 3.5mm (1/8") stereo mini jack
  • Input impedance : 10k ohms
  • Standard input level : -10dBV
  • Maximum input level : +6dBV

Analog audio output

  • CAMERA OUT connector : 
  • Connector : 3.5mm (1/8") stereo mini jack
  • Output impedance : 200 ohms
  • Standard output level : -50dBV
  • Maximum output level : -30dBV
  • LINE OUT connector : 
  • Connector : 3.5mm (1/8") stereo mini jack
  • Output impedance : 200 ohms
  • Standard output level : -10dBV
  • Maximum output level : +10dBV

PHONES connector   

  • Connector : 3.5mm (1/8") stereo mini jack
  • Maximum output level : 50mW + 50mW

Usb

  • Connector : Mini-B type
  • Format : USB2.0 HIGH SPEED mass storage class

Remote

  • Connector : 2.5mm TRS jack
  • Power : Four AA batteries(Alkaline or NI-MH),
  • USB bus power,
  • Dedicated AC adapter(TASCAM PS-P515U, sold separately),
  • Dedicated external battery pack(TASCAM BP-6AA, sold separately)
  • Power consumption : 5.4W
  • Continuous operation time : 2ch WAV, 44.1kHz, 16bit rec

DR-60D

  • Alkaline batteries (EVOLTA) : About 2:30 min (Phantom on)
  • About 4:30 min (Phantom off)
  • NI-MH batteries (eneloop) : About 3:15 min (Phantom on)
  • About 5:00 min (Phantom off)
  • NI-MH batteries (eneloop pro) : About 3:45 min (Phantom on)
  • About 6:00 min (Phantom off)

DR-60D+BP-6AA

  • Alkaline batteries (EVOLTA) : About 5:30 min (Phantom on)
  • About 10:30 min (Phantom off)
  • NI-MH batteries (eneloop) : About 7:30 min (Phantom on)
  • About 12:00 min (Phantom off)
  • NI-MH batteries (eneloop pro) : About 9:30 min (Phantom on)
  • About 14:30 min (Phantom off)
  • Dimensions : 133(W)×93.2(H)×78(D)mm (with the top adapter attached)
SKU TAS-DR60DMKII
Brand Tascam
Weight 1.0100
Dimensions (WxHxD) No

.

Deal Request

TASCAM DR-60D mkII Portable Recorder

$199.99

Submit the price you are willing to pay for this item.

You will receive a quick response from our crew.

Or just call us now

(888) 890-6222

Please wait...

Continue shopping
View cart & checkout
  • Loading,Please wait...

    PayPal Checkout
Continue shopping
View cart & checkout