Click to enlarge
 | | |
| | DESCRIPTION |  | | It's amazing. One little button. So much effect. dbx® Type III® Noise Reduction is an entirely new concept... virtually instantaneous encode/decode within the circuitry of the box. We started out to build the finest EQs possible, boxes with the heritage and performance to rival our famous 30 Series EQs. And to no one's surprise they came out awfully darn good. (Ask to see the Audio Precision plots compared to the competition.) But then, Roger (our chief engineer, a nice guy, as far as engineers go) got the crazy idea of putting this new noise reduction stuff in the box. We listened to it and were amazed. The EQs sounded great without it but with it the performance was nothing short of incredible. Check it out yourself and see.
But hey, Roger wasn't about to stop there. PeakPlus™ Limiter. Who knows more about limiting than the folks at dbx; nobody... that's who. So when the guys were developing this new series of EQs they wanted something that would be unique to these EQs. That's when Roger got another one of his bright ideas and said "I bet they'll work a lot better if there's a cool limiter built in." Next thing you know, all the guys are in the studio amazed at the new limiter Roger had designed specially for the 20 Series. Once again, hearing is believing... With a threshold range of 0dbu to plus 20dbu, the patent-pending PeakPlus limiter is designed to tame your program material from the subtlest nuances to the rowdiest hits. Also, the four stage LED ladder gives you a great visual indication as to what the limiter is doing.
20 Series EQs. You used to have to settle for second best in a reasonably priced EQ but not any more. With the new 20 Series from dbx Professional Products you get a great EQ circuit, a graceful yet powerful limiter and the revolutionary new design of the Type III Noise Reduction. Check out the dbx 20 Series graphic EQs at your pro audio outfitter. You'll see, with the 20 Series EQs you get MORE!!! |
| | | | | | |
| FEATURES & SPECS
| | | Features
Revolutionary instant encode/decode Type III® Noise Reduction in-circuit at the push of a button. Increases S/N ratio by up to 20dB
Patent-pending PeakPlus™ Limiter threshold range from 0dBu to +24dBu (off) can transparently tame the wildest hits or the subtlest nuances of any signal
An extremely high quality EQ, patent-pending Type III® Noise Reduciton, and the elegant new PeakPlus™ Limiter all in one great sounding box
Four segment LED bargraph for BOTH Gain Reduction AND Output Level offers the most comprehensive visual feedback available
Status LEDs offer visual feedback for all settings on the front panel
INPUT
Connectors:
1/4" TRS, female XLR (pin 2 hot), and barrier terminal strip
Type:
Electronically balanced/unbalanced, RF filtered
Impedance:
Balanced 40k ohm, unbalanced 20k ohm
Max Input Level:
>+21dBu balanced or unbalanced
CMRR:
>40dB, typically >55dB at 1kHz
OUTPUTS
Connectors:
1/4" TRS, male XLR (pin 2 hot), and barrier terminal strip
Type:
Impedance-balanaced/unbalanced, RF filtered
Impedance:
Balanced 200 ohm, unbalanced 100 ohm
Max Output Level:
>+21dBu balanced/unbalanced into 2k or greater
>+18dBm balanced/unbalanced (into 600)
SYSTEM PERFORMANCE
Bandwidth:
20Hz to 20kHz, +/-0.5dB
Frequency Response:
<10Hz to >50kHz, +0.5/-3dB
Noise Reduction In:
(+/-6 and +/-15dB range):
Signal-to-Noise:
>102dB, unweighted, ref: +4dBu, 22kHz measurement bandwidth
Dynamic Range:
>120dB, unweighted
Noise Reduction Out:
(+/-6dB range):
Signal-to-Noise:
>94dB, unweighted, ref: +4dBu, 22kHz measurment bandwidth
Dynamic Range:
>112dB, unweighted
Noise Reduction Out:
(+/-15dB range):
Signal-to-Noise:
>90dB, unweighted, ref: +4dBu, 22kHz measurement bandwidth
Dynamic Range:
>108dB, unweighted
THD + Noise:
<0.04%, 0.02% typical at +4dBu, 1kHz
Interchannel Crosstalk:
<-80dB, 20Hz to 20kHz
Noise Reduction:
Up to 20dB of dynamic broadband noise reduction
FUNCTION SWITCHES
Type III NR:
Activates dbx® Type III® Noise Reduction
EQ Bypass:
Bypasses the Graphic Equalizer section in the signal path
Low Cut (recessed):
Activates the 40Hz 18dB/octave Bessel high-pass filter
Range (recessed):
Selects either +/- 6dB or +/-15dB slider boost/cut range
INDICATORS
Output Level Meter:
4-LED bar graph (Green, Green, Yellow, Red) at -10, 0, +10, and +18dBu
Gain Reduction Meter:
4-LED bar graph (all Red) at 0, 3, 6, and 10dB
Type III® NR Active:
Yellow LED
EQ Bypass:
Red LED
Clip:
Red LED
Low Cut Active:
Red LED
+/-6dB range:
Yellow LED
+/-15dB range:
Red LED
POWER SUPPLY
Operating Voltage:
100VAC 50/60Hz, 120VAC 60Hz
230VAC 50/60Hz
Power consumption:
18W
Main Connection:
IEC receptacle
PHYSICAL
Dimensions:
3.5" H X 19" W X 7.9" D (8.9cm x 48.3cm x 20.1cm)
Weight:
8.5 lbs. (3.9 kg)
Shipping Weight:
9.5 lbs. (4.3 kg)
Note: Specifications subject to change without notice.
| | | |  | | |
|
| | Return Policy If for any reason you are not completely satisfied with any item, return it within 30 days of the shipping date. We are unable to accept any returns if any of the contents or packaging appears damaged in any way. We strongly suggest that you check your order after receiving it to be sure that it is in proper working order. Items which are not normally stocked ("Special Orders", discontinued products, close-outs, used products, etc.) are not returnable. Returned items must be in resalable condition. Resalable Condition means that the product(s) is exactly in the same condition as you received it. All exchanges must be pre-paid, returned in original packaging, blank warranty cards, manuals and show no signs of wear or damage. If the product is not in the same condition as when you originally received, it you may be subject to a minimum 15% restocking fee. Shipping and handling charges are non-refundable. Please contact us for a Return Material Authorization (RMA) number and instructions before returning any items. Upon receipt of the returned product a credit will be issued according to your payment method. If any product is damaged in shipping, you should address the issue promptly with the appropriate carrier. There are certain items that cannot be returned due to federal and state regulations. These items include Software and any item that is considered for personal use; such as an earphones, instrument mouthpieces, or other items that you wouldn't want to purchase if someone else had previously used them. We cannot accept returns if any of the packaging is damaged/missing. There are certain items that cannot be returned due to federal regulations. These items include Software and any item that is considered for personal use; such as an earphones, instrument mouthpieces, or other items that you wouldn't want to purchase if someone else had previously used them. Please contact us for a Return Material Authorization (RMA) number first. While MAP restricts our advertised price it does not dictate the final selling price. gear@proaudiostar.com | | | | | | | | | BUY WITH CONFIDENCE | | New in box: never opened and never used We collect NYS Sales Tax Payment methods: - PayPal, secure online payment - Cashiers Cheks or MO Shipping and handling charges: Fedex shipping within the US Best offer may not include shipping Please send e-mail to: gear@proaudiostar.com | | | | |
|
|
Price: $429.95
WE WILL GO LOWER!
or call us at: 1-888-890-6222
|
|
|
