 |
|
Categories
|
|
Presonus Central Station Monitoring Interface B STOCK
WE WILL BEAT ANY AUTHORIZED DEALER PRICE! CALL OR EMAIL FOR A BETTER PRICE!
1-888-890-6222 or e-mail sales@proaudiostar.com
Click to enlarge
Presonus Central Station  | | ON THIS AUCTION WE ARE LISTING |  | gear@proaudiostar.com
Presonus Central Station
Studio Monitoring Interface
| |
| This photo is to show you what is inside the box.
| | |
|
| | | | | | |
| | DESCRIPTION | | | THE ULTIMATE STUDIO CONTROL CENTER
The Central Station is the ultimate studio-monitoring interface for the modern digital studio. The Central Station features three sets of stereo analog inputs to switch between input sources such as: DAW, mixer, CD/DAT/Tape player, or keyboards/samplers. Two stereo analog inputs feature TRS balanced and the third stereo input features RCA inputs with trim control for level matching of input signals. In addition, the Central Station will accommodate two digital inputs via S/PDIF or TOSLINK providing D/A conversion up to 24Bit/192kHz. This allows you to monitor DAW and CD/DAT outputs through the same professional quality converter for the most accurate A/B comparison and highest quality monitoring environment. The digital to analog converter offers the highest possible audio quality with over 117dB dynamic range and ultra high quality analog circuitry. The Central Station features three sets of monitor outputs, each with their own set of passive trim controls. The monitoring section also provides MUTE, DIM and MONO switches. In addition, the Central Station includes a set of CUE outputs that can feed headphone amplifiers and a separate stereo MAIN line level output.
PURELY PASSIVE SIGNAL PATH
The Central Station features a PURELY PASSIVE SIGNAL PATH for ultimate sonic performance. The main audio path of the Central Station uses no amplifier stages including op amps or active IC's (integrated circuits) that add noise, color, distortion, and give that "pinched" sound. Distortion produced by op amps and IC's also gives added ear fatigue.
Signal routing in the Central Station is acheived utilzing 34 sealed mechanical relays (instead of active IC's) maintaining a minimal signal path design wherein extraneous electronics are hard-wire bypassed. Using relays ensures the most transparent signal path maximizing dynamic range, frequency range, and headroom, while minimizing noise and coloration. The Central Station uses the highest quality passive components including military grade 1% tolerance metal film resistors, multi-element potentiometers and ultra-durable connectors to deliver the highest sonic performance.
METERING
The Central Station features dual fast-acting 30-segment peak/hold LED's for accurate metering. The front panel of the Central Station includes both dBu and dBfs scale as well as peak/hold clear switch and meter alignment switch for addtional metering options.
TALKBACK
The Central Station has an onboard TALKBACK microphone which is routed through the CUE outputs for communication between artist and engineer. The Central Station also includes a Microphone XLR input on the rear panel for use with an external microphone. When TALKBACK is used the CUE mix is automatically "dimmed" for added ease of communication.
CSR-1 CENTRAL STATION REMOTE CONTROL (optional)
The Central Station Remote Control (CSR-1) can be connected to the rear of the Central Station via db15 connector to control VOLUME, TALKBACK, MUTE, input source switching and speaker output switching functions. Keep the Central Station in your rack with your gear and use the CSR-1 for ultimate control and flexibility. |
| | | | | | |
| FEATURES & SPECS
| | | Passive Audio Path - no op amps or IC's in main audio path
• Five stereo inputs (2 digital and 3 analog)
• 24-Bit/192kHz DAC (>117dB dynamic range) via SPDIF and TOSLINK
• Three sets of monitor outputs; each with passive volume control
• Talkback microphone with volume to feed headphone and cue output
• Accurate dual 30-segment LED for metering
• Two front panel headphone jacks with separate volume control
• MAIN and CUE stereo output have independent input source
• Optional console remote control with input, output, talkback, and volume
Audio Inputs TRS1&2 Type ¼” TRS Passive-Balanced Input Impedance 2K-5K Ohm (Speaker load and Trim level dependent) S/N Ratio Greater than 140dB THD+N Less than .0005% (1KHz @ 0dBu) Frequency Response Greater than 1MHz AUX Type RCA Active-Unbalanced Input Impedance 8Kohm S/N Ratio Greater than 115dB (1KHz @ 0dBu, Unity gain) THD+N Less than .002% (1KHz @ 0dBu, Unity gain) Frequency Response 10Hz-50KHz, -.5dB Gain Range -90dB to +20dB S/PDIF Types RCA 75Ohm-coax and Toslink optical Dynamic Range 117dB THD+N 0.0025% (1KHz @ -1dBfs) Maximum output +18dBu (Active-Balanced) Sample Rates 44.1K, 48K, 88.2K, 96K, 176.4K, 192K Note: All Input specifications (except Input Impedance) measured at Speaker A output, Trim and Main Level set to maximum. Audio Outputs Speakers Type ¼” TRS Passive-Balanced Type-Mono Activated ¼” TRS Active-Impedance Balanced Trim Range -90dB to 0dB Main Level Range -90dB to 0dB Dim Attenuation -30dB Main Type ¼” TRS Active-Balanced Output Impedance 51Ohm THD+N Less than 0.0025% Frequency Response 10Hz-50KHz, -.5dB Cue Type ¼” TRS Active-Impedance Balanced Output Impedance 51Ohm THD+N Less than .003% (1KHz @ 0dBu) Frequency Response 10Hz-50KHz, -.5dB Gain Range -90dB to 0dB Dim Attenuation -30dB (Talkback activated) Headphones Type ¼” TRS Active Stereo Maximum Output 150mW/channel @ 60 Ohm load THD+N 0.015% (150mW/channel @ 60 Ohm load) Frequency Response 10Hz-50KHz, +1dB Talkback Dynamic Microphone Input Type XLR Female Balanced Input Impedance 2400 Ohm Internal Microphone Type Electret Condenser Sensitivity -42dB Mic Preamp Gain Range 15-55dB Input Meters Type Dual 30 segment LED w/ Peak Hold Range -48dB to +18dB (-66dBfs to 0dBfs) Accuracy Better than .25dB Frequency Range 10Hz-22KHz Calibrate Range +/- 18dB Power Supply Type External A.C. Transformer/Internal Linear Power Consumption 40VA Physical Main Chassis Package Type 1U - steel chassis Dimensions 19(W) X 1.75(H) X 5.50(D) inches Weight 5.0lbs External Power Supply Package Type Molded Plastic Dimensions 2.5(W) X 2.3(H) X 4.0(D) inches Weight 2.5lbs | | | |  | | |
|
| | Return Policy If for any reason you are not completely satisfied with any item, return it within 30 days of the shipping date. We are unable to accept any returns if any of the contents or packaging appears damaged in any way. We strongly suggest that you check your order after receiving it to be sure that it is in proper working order. Items which are not normally stocked ("Special Orders", discontinued products, close-outs, used products, etc.) are not returnable. Returned items must be in resalable condition. Resalable Condition means that the product(s) is exactly in the same condition as you received it. All exchanges must be pre-paid, returned in original packaging, blank warranty cards, manuals and show no signs of wear or damage. If the product is not in the same condition as when you originally received, it you may be subject to a minimum 15% restocking fee. Shipping and handling charges are non-refundable. Please contact us for a Return Material Authorization (RMA) number and instructions before returning any items. Upon receipt of the returned product a credit will be issued according to your payment method. If any product is damaged in shipping, you should address the issue promptly with the appropriate carrier. There are certain items that cannot be returned due to federal and state regulations. These items include Software and any item that is considered for personal use; such as an earphones, instrument mouthpieces, or other items that you wouldn't want to purchase if someone else had previously used them. We cannot accept returns if any of the packaging is damaged/missing. There are certain items that cannot be returned due to federal regulations. These items include Software and any item that is considered for personal use; such as an earphones, instrument mouthpieces, or other items that you wouldn't want to purchase if someone else had previously used them. Please contact us for a Return Material Authorization (RMA) number first. While MAP restricts our advertised price it does not dictate the final selling price. gear@proaudiostar.com   | | | | | | | | | BID WITH CONFIDENCE | | We collect NYS Sales Tax Payment methods: - PayPal, secure online payment - Cashiers Cheks or MO Shipping and handling charges: Fedex shipping within the US Best offer may not include shipping Please send e-mail to: gear@proaudiostar.com | | | | |
|
|
Price: $425.00
WE WILL GO LOWER!
or call us at: 1-888-890-6222
|
|
|
E-mail a friend
about this item.
Return to Catalog
|
|
