| Features: 2-channel USB interface 16-bit/44.1kHz to 24-bit/48kHz audio One XLR microphone input 2 TRS line inputs 2 TRS and RCA line outs Hi-Z instrument input (front panel) 1/8" headphone jack Zero-latency direct monitoring USB bus powered Input level controls with peak meters Technical Info Microphone Inputs: (1) Female XLR Pin 2 Hot Input Impedance: 600 ohms balanced Phantom Power: No GAIN: +50 dB EIN: -115dB A-weighted @50dB gain (150 Ohm source impedance) Maxium Input Level: +10dBu Frequency Response: +0, ?0.5 dB 20 Hz - 20 kHz, ref. 1 kHz THD+N: <.005%, 20 Hz - 20 kHz Line Inputs: (2) 1/4 in. TRS balanced or unbalanced Input Impedance: 20 kOhm balanced, 10 kOhm unbalanced Maximum Input Level: +12 dBu Frequency Response: +0, ?0.2 dB 20 Hz - 20 kHz, ref. 1KHz THD+N: <.009% A/D, 20 Hz - 20 kHz Instrument Input: (1) 1/4 in. mono jack Input Impedance: 1 MOhm unbalanced Maximum Input Level: +8.5 dBu Frequency Response: +0, ?1 dB 20 Hz - 20 kHz, ref. 1 kHz THD+N: <.125% A/D Crosstalk: <-74dB any input or output to any recording channel, 20Hz - 20kHz <-95dB at 1kHz typical Line Outputs: (2) 1/4 in. TRS bal./unbal. +(2) RCA Level: +16dBu maximum (1/4 in. TRS) Impedance: 1k ohm balanced, 500 ohm unbalanced Headphone Output: (1) 1/8 in. stereo jack 20 mW per channel at 50 Ohms D/A - A/D Sample Rate: 44.1 kHz or 48 kHz (determined by computer application) Dynamic Range: A/D (24 Bit) 100 dB typical, A-weighted, 20 Hz - 20 kHz D/A (24 Bit) 100 dB typical, A-weighted, 20 Hz - 20 kHz A/D/A (24 Bit) 97 dB typical, A-weighted, 20 Hz - 20 kHz USB Type B Socket: Version 1.1, Version 1.1 hubs ar not supported Power Requirements: USB Bus-Powered Dimensions: 6.75 in. Wx 1.6 in. Hx 6.5 in. D Weight: 1.1 lbs. (0.49kgs) |