Click to enlarge
 | | |
| | DESCRIPTION |  | | The DriveRack 220i is a 2x2 Loudspeaker Management System
Designed from the ground up to provide state-of-the-art signal processing, the DriveRack 220i is the perfect tool for any fixed-install application. With a full complement of processing features and Mic/Line inputs the DriveRack 220i can provide both system and microphone processing. Featuring the new, patent-pending Advanced Feedback Suppression (AFS) algorithm, equalization, dynamics processing, delay, matrix mixing, and bandpass filters, the DriveRack 220i will exceed your expectations.
The DriveRack 220i is piloted from the intuitive DriveWare GUI that offers both Configuration and Control of the processing modules. Modules can be accessed, edited and saved as part of programs. Processing modules can be linked between the channels for true stereo processing. If independent processing is desired, parameters can be copied from one channel to the next to ensure that setup is quick and easy. Stored programs can be loaded from either the front panel or from wall mounted Zone Controllers. Zone Controllers can also be used for output muting or adjusting output volumes.
ZONE CONTROLLERS
The Zone Controllers offer extended utility to the DriveRack®and ZonePro families. The nine Zone Controllers use analog DC voltage to provide logic control ranging from zone source selection, volume and muting, to program or scene selection and fire safety muting. Wired with readily available and affordable CAT5 cable with universally accepted rj-45 connectors at distances up to 1000 ft, the ZC Zone Controllers offer simple yet elegant solutions to the contractor.
The ZC-1 provides programmable remote volume control for the DriveRack 260, 220i and the ZonePro 640 and 641. The ZC-2 offers programmable volume and mute control for the DriveRack 220i, 260 and the ZonePro 640 and 641. The ZC-3 can function as a program selector for the DriveRack 260 and 220i; in addition it can be used for as a source selector, page steering control, or a scene selector for the ZonePro products. The ZC-4 provides program change capability from contact closures for the DriveRack 220i and 260; it can also provide source selection, page steering, or scene selection for the ZonePro 640 and 641. The ZC-6 is a programmable volume control for the ZonePro 640 and 641. The ZC-7 is a programmable push -to-talk page assignment controller for the ZonePro devices. The ZC-8 provides both programmable source selection and volume control to the ZonePro 640 and 641. The ZC-BOB allows “home run” or parallel wiring to the DriveRack and ZonePro devices. The ZC-FIRE is a dedicated fire safety interface for the ZonePro products that allows selection of either system mute or scene selection upon being triggered by either a relay or control voltage from the fire safety system.
All information is subject to change without notice.
Noise Gating
De-Esser
Ducker
Bandpass Filters
2x2 Matrix Mixer
1.3 Seconds of Delay
RS-232 PC GUI control
Mic/Line Inputs
Wall Panel Control
Security Lockout |
| | | | | | |
| FEATURES & SPECS
| | | Features
Advanced Feedback Suppression (AFS)
Graphic and Parametric EQ
Compressor
Limiter
Auto Gain Control
Noise Gating
De-Esser
Ducker
Bandpass Filters
2x2 Matrix Mixer
1.3 Seconds of Delay
RS-232 PC GUI control
Mic/Line Inputs
Wall Panel Control
Security Lockout
Specifications:
Analog Inputs
Number of Inputs:
(2) Switchable line or mic inputs
Connectors:
Female XLR line inputs and Euroblock
Type:
Electronically balanced/RF filtered
Impedance:
>50k ohm
Maximum Input Level:
+20dBu
CMRR:
> 40dB, typically >55db @ 1kHz
Mic Pre gain:
30 to 60dB
Mic EIN:
< 110dB, 22Hz-22kHz, 150 ohm
Mic Phantom Power:
15v
Analog Outputs
Number of Outputs:
2
Connectors:
Male XLR and Euroblock
Type:
Electronically balanced, RF filtered
Impedance:
120ohm balanced, 60ohm unbalanced
Max Output Level
+20dBu
A/D Performance
Type:
dbx Type IV™ Conversion Systm
Dynamic Range line:
>113 dB A-weighted, >110 dB unweighted
Type IV™ dynamic
range:
>119 dB, A-weighted, 22kHz BW
>117 dB, unweighted, 22kHz BW
Sample Rate:
48kHz
D/A Performance
Dynamic Range:
112 dB A-weighted, 109dB unweighted
System Performance
Dynamic Range :
>110 dB A-weighted, >107dB unweighted
THD + Noise:
0.003% typical at +4dBu, 1kHz, 0dB gain
Frequency Response:
20Hz – 20kHz, +/- 0.5dB
Interchannel Crosstalk:
>110dB, 120dB typical
Crosstalk input-output:
>780dB
Power Requirements
Operating voltage:
100 VAC, 50/60Hz, 120 VAC, 60Hz, 230VAC 50/60Hz
Dimensions:
19” Wide, 1.75”High, 7.7” Deep
Safety Agency Approvals:
UL 6500, IEC 60065, EN 55013, E 60065
| | | |  | | |
|
| | Return Policy If for any reason you are not completely satisfied with any item, return it within 30 days of the shipping date. We are unable to accept any returns if any of the contents or packaging appears damaged in any way. We strongly suggest that you check your order after receiving it to be sure that it is in proper working order. Items which are not normally stocked ("Special Orders", discontinued products, close-outs, used products, etc.) are not returnable. Returned items must be in resalable condition. Resalable Condition means that the product(s) is exactly in the same condition as you received it. All exchanges must be pre-paid, returned in original packaging, blank warranty cards, manuals and show no signs of wear or damage. If the product is not in the same condition as when you originally received, it you may be subject to a minimum 15% restocking fee. Shipping and handling charges are non-refundable. Please contact us for a Return Material Authorization (RMA) number and instructions before returning any items. Upon receipt of the returned product a credit will be issued according to your payment method. If any product is damaged in shipping, you should address the issue promptly with the appropriate carrier. There are certain items that cannot be returned due to federal and state regulations. These items include Software and any item that is considered for personal use; such as an earphones, instrument mouthpieces, or other items that you wouldn't want to purchase if someone else had previously used them. We cannot accept returns if any of the packaging is damaged/missing. There are certain items that cannot be returned due to federal regulations. These items include Software and any item that is considered for personal use; such as an earphones, instrument mouthpieces, or other items that you wouldn't want to purchase if someone else had previously used them. Please contact us for a Return Material Authorization (RMA) number first. While MAP restricts our advertised price it does not dictate the final selling price. gear@proaudiostar.com | | | | | | | | New in box: never opened and never used We collect NYS Sales Tax Payment methods: - PayPal, secure online payment - Cashiers Cheks or MO Shipping and handling charges: Fedex shipping within the US Best offer may not include shipping Please send e-mail to: gear@proaudiostar.com | | | | |
|
|
Price: $629.95
WE WILL GO LOWER!
or call us at: 1-888-890-6222
|
|
|
