| Features:
48 and 96 kHz operation with Wordclock input
Full Color QVGA Display
4 analog and AES/EBU inputs
8 analog and AES/EBU outputs
Optional CobraNet I/O
Optional Jensen® I/O Transformers
Full Bandpass Filter, Crossover and Routing Configurations with Bessel, Butterworth, and Linkwitz-Riley filters
31-Band Graphic and 9-band Parametric EQ on every input
6-band Parametric EQ on every output
Loudspeaker Cluster and Driver Alignment Delays
Selectable DSP inserts on all inputs and outputs including Classic dbx Compression, Limiting and Advanced Feedback Suppression among others
Ethernet HiQnet networking and control
dbx ZC wall panel control
Specifications:
Inputs
Number of Inputs:
4
Connectors:
Female XLR
Type:
Electronically balanced/RF filtered
Impedance:
>50k ohm
Maximum Input Level:
Software selectable for: +28, +26, +24, +22, +20, +18, +16, +14 dBu
CMRR:
>40 dB typical, >55 dB at 1 kHz
Digital Inputs
Inputs:
(4) AES/EBU Channels
Connectors:
Female XLR
Type:
Transformer Isolated, RF filtered
Impedance:
>110 ohms
RTA Inputs
Input:
(1) Analog
Connectors:
Female XLR
Gain Range :
10dB to 50dB in 10dB increments
Analog Outputs
Inputs:
8
Connectors:
Male XLR
Type:
Electronically balanced, RF filtered
Impedance:
30 ohms
Max Output Levels:
Software selectable for: +24, +22, +20, +12, +8, +4 dBu
Digital Outputs
Outputs:
(8) AES/EBU Channels
Connectors:
Male XLR
Type:
Transformer Isolated, RF filtered
Impedance:
>110 ohms
A/D Performance
Type:
dbx Typve IV™ Converstion System
Dynamic Range :
>114 dB unweighted, 116dB A-weighted
Type IV™ dynamic
range:
128dB with transient material, A-weighted, 22kHz BW 126 dB with transient material, unweighted, 22 kHz BW 120 dB typical with program material, A-weighted, 22 kHz BW
Samle Rate:
96kHz
A/D Wordlength:
24 bits
D/A Performance
Dynamic Range:
112 dB unweighted, 115 dB A-weighted
Sample Rate:
96kHz
D/A Wordlength:
24 bit
System Performance
Dynamic Range:
112dB unweighted, 115dB A-weighted
Internal Processing:
32 bit floating point
THD + Noise:
0.004% typical at +4 dBu, 1 kHz, 0 dB input gain
Frequency Response:
20 Hz- 40 kHz, +/-0.5 dB
Interchannel Crosstalk:
<-85 dB at 1 kHz, 0 dB input gain
Processing
Pre EQ Type:
One 31-band Graphic EQ on each input One EQ that is switchable between 31-band and 9-band Parametric on each input
Range:
+/- 12dB
Input Insert Procssing:
Two selectable Insert Processing blocks per input
Type:
Noise Gate, Compressor, Auto Gain Control, De-Esser, Sub-Harmonic Synth, Advanced Feedback Suppression
Input Delay Length:
Up to 682 mSec available
Routing/Mixing:
4-input mixer available at each output allowing any input to be sent or mixed to any output
Output Insert Procssing:
Two selectable Insert Processing blocks per output
Type:
Noise Gate, AutoWarmth®, Compressor, Auto Gain Control, Peak Limiter, Sub-Harmonic Synth, Advanced Feedback Suppression
X-Over Filter Configs:
1x1, 1x2, 1x3, 1x4, 1x5, 1x6, 1x7, 1x8, 2x2, 2x3, 2x4 2x5, 2x6, 2x7, 2x8, 3x3, 3x4, 3x6, 3x7, 4x4, 4x5, 4x8
Type:
Bessel 6, 12, 18, and 24 dB per Octave Butterworth 6, 12, 18, and 24 dB per Octave Linkwitz-Riley 12, 24, 36, and 48 dB per Octave
Polarity:
Positive and Negative
Phase Control:
0 to -180 degrees in 5 degree increments
Output Delay Length:
1365 mSec shared between the outputs
Miscellaneous
I/O Transformers:
Optional
CobraNet® I/O:
Optional
Control:
Ethernet, RS-232, Optional dbx ZC Wall Panels
Power Requirements:
100V to 240V 50/60Hz, 45 Watts
Dimensions:
3.5"x19"x12.15"
Weight:
11 lbs.
Shipping Weight:
12.5 lbs.
|
