OctoPre LE, the "lite edition" of the company's established OctoPre, brings Focusrite pre-amplification and A/D-D/A conversion to a new level of affordability for DAW and digital console users. OctoPre LE provides eight channels of pristine Focusrite preamps, including two "Super Channels" that offer mic impedance matching and instrument DI inputs plus other features.

With the optional A/D-D/A board installed, OctoPre LE brings more to the DAW via ADAT* lightpipe than ever before, allowing users to make the most of often neglected ADAT* inputs and outputs for tracking and monitoring. In addition, the A/D-D/A option provides wordclock in and out as well as being the only converter in its class to feature 256x clock - a must-have for Pro Tools engineers.

Extremely easy to use, OctoPre LE helps to save session time and engineer heartache. Auto switching front and rear panel inputs and total control of the digital I/O from the front fascia allow the unit to remain racked and patched, with every I/O solution available at the flick of a switch. In typical Focusrite fashion, the OctoPre LE upholds professional standards throughout, boasting class-leading specifications.

Features

Eight Focusrite Pre-amps
Upholding Focusrite's high bandwidth (20Hz to 200kHz!) philosophy, ensuring low noise and distortion whilst delivering clarity without unwanted artifacts

Two Instrument D.I.s
Saffire PRO 10 i/o's first two channels feature high specification instrument inputs, instantly accessible on the front fascia.

Two ‘Super Channels’
These two channels offer mic impedance matching and instrument DI inputs, alongside phase reverse on the front fascia.

Eight channel CODEC
With eight channels of A-D and D-A via ADAT, OctoPre LE helps make the most of often neglected ADAT* inputs and outputs for tracking and monitoring.

Eight Front Panel Line Inputs
Allows quick and easy connection of line level sources

Specifications
Mic Input Response
• Gain = +13dB to +60dB
• Input Impedance = 2.5k/ 150 on Lo Z (Ch1 & 2)
• EIN = 124dB @ 60dB Gain with 150 Termination & 22Hz/22kHz Filter
• THD+N @ Min Gain (+13dB) = 0.0006% with 0dBu input & 22Hz/22kHz Filter
• THD+N @ Max Gain (+60dB) = 0.003% with -36dBu input & 22Hz/22kHz Filter
• THD+N @ Max Input (+9dBu) = 0.0008% with 22Hz/22kHz Filter
• Frequency Response:
• Min Gain (+13dB) with -13dBu input = -0.4dB @ 10Hz & -3dB @ 122kHz
• Max Gain (+60dB) with -60dBu input = -2.3dB @ 10Hz & -3dB @ 67kHz
• CMRR @ Max Gain (+60dB) = 80dB

Line Input Response
• Gain = -10dB to +36dB
• Input Impedance = 24k
• Noise @ Unity Gain (0dB) = -88dBu with 22Hz/22kHz Filter
• S/N Ratio relative to max headroom (+36dBu) = 124dB
• S/N Ratio relative to 0dBfs (+22dBu) = 110dB
• THD+N @ Unity Gain (0dB) = 0.001% with 0dBFS (+22dBu) input and 22Hz/22kHz Filter
• Frequency Response @ Unity Gain (0dB) = -0.5dB @ 10Hz & -3dB @ 110kHz

Instrument Input Response
• Gain = +13dB to +60dB
• Input Impedance = 1M
• Noise @ Min Gain (+13dB) = -87dBu with 22Hz/22kHz Filter
• Noise @ Max Gain (+60dB) = -42dBu with 22Hz/22kHz Filter
• THD+N @ Min Gain (+13dB) = 0.001% with 0dBu input & 22Hz/22kHz Filter
• Frequency Response @ Min Gain (+13dB) with -13dBu input = -0.4dB @ 10Hz & -3dB @ 122kHz

Input Meter
• Peak Level Moving Coil Meter
• -24dBfs to +2dBfs (-2dBu to +24dBu), +22dBu = 0dBfs
• Overload LED's triggered @ 0dBfs (+22dBu)

High Pass Filter
• Roll off = 12dB per octave 2 pole filter
• Cut off frequency:
-3dB at 120Hz
-6dB at 85Hz
-12dB at 56Hz

Weight
• 4.2kg
• 9.3Ibs

Dimensions
• 484mm (W) x 44mm (H) x 265mm (D)
• 19" (W) x 1.7" (H) x 10.4" (D)