Brooklyn's #1 Source for Pro Audio & DJ Equipment

888-890-6222 // 718-522-1071 // 217 Russell St, Brooklyn, NY Map »

Call Us: 888-890-6222 // 718-522-1071


RME DMC 842 Mic Pre-amp

8-channel 24 Bit/192 kHz Remote Controllable Digital Microphone Preamp

rme dmc842_2

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • rme dmc842_1
  • rme dmc842_2
  • rme dmc842_3
Brand New
Affirm Financing:
$4,199.00

Availability: In stock now

"Don't See The Deal You Want?" Request A Deal

Question about this item?

Call: 888-890-6222

.

Product Description for the RME DMC 842 Mic Pre-amp

The DMC-842 from RME is an 8-channel AES42 interface and control device for digital microphones. AES42-2001 is an extension of the current AES digital audio standard that provides the framework for interfacing and controlling professional digital microphones (not to be confused with the consumer type of USB equipped microphones).

The DMC-842 supports both Mode 1 and Mode 2 operation. Depending on the mode implemented by the microphone's manufacturer, the unit can supply power to the microphone while also providing for the remote control of parameters. These include polar pattern, pre-attenuation, enabling a low cut filter, pre-amplification, mute and polarity, in addition to getting feedback about signal levels.

Mode 1 is a protocol that allows for supplying Digital Phantom Power (DPP), switchable per channel, but no control data can be transmitted to the microphone. Sample rate conversion is available on a per channel basis for situations where the use of multiple Mode 1 type microphones is required. Mode 2 allows microphones to be synchronized and control data to be sent. Either mode is available per channel.

• Eight-channel digital microphone interface and controller with 8 XLR AES42 inputs
• Eight-channels of XLR balanced line output
• Eight-channels of output via AES/EBU at up to 192kHz and ADAT Lightpipe at up to 96kHz
• Supports both Mode 1 and Mode 2 functioning as specified within the AES42 standard
• Mode 1 microphones require the use of sample rate converters, which are available and switchable on each channel
• Microphones with Mode 2 functionality can have their settings for gain, polar pattern, hi-pass filter and compression set remotely, while simultaneously receiving back microphone status data (synchronized operation)
• Digital Phantom Power can be switched on or off on individual channels
• Intelligent Clock Control and SyncCheck ensure perfect synchronization and provide clear detection of errors
• The DMC-842 can be fully remote controlled and configured via MIDI, and all status displays can be queried through MIDI
• M/S (Mid/Side) encoding and decoding provided on each channel
• Windows software (included via download) can use the MIDI port to perform remote control and status requests of any number of DMC-842s via a mouse click
• LED level meter with 13 LEDs per channel
• Unit is future-proof with the ability to have hardware upgrades performed via flash updates

Features

Number of Channels     8
Inputs                            8 x XLR AES42
                                      1 x BNC Wordclock
                                      1 x 5-pin DIN MIDI
Output                           8 x XLR Line, balanced
                                      1 x 25-pin D-sub (4 stereo AES/EBU)
                                      2 x TOSLink ADAT optical
                                      1 x BNC Wordclock
                                      1 x 5-pin DIN MIDI
Phantom Power             Digital phantom power, switchable per input
Multi Function                8-channel sample rate converter

Sample Rates

Internal:                         44.1, 48, 88.2, 96, 176.4 and 192kHz
External:                        AES: 28kHz - 200kHz
Wordclock:                    27kHz - 200kHz
Gain Range                   63dB
Maximum Output Level +24dBu
Frequency Response     D/A
                                       5Hz - 22kHz, -0.5dB @ 48kHz
                                       5Hz - 34kHz, -0.5dB @ 96kHz
                                       5Hz - 50kHz, -1.0dB @ 192kHz
Noise     D/A SNR
                                       116dB RMS unweighted, 119dB A-weighted
Power Requirements     100 - 240VAC, 60W, internal switching
Dimensions (WxDxH)     With Rack Ears:
                                       19 x 3.46 x 9.5" (483 x 88 x 242mm)
Weight                            Not Specified by Manufacturer
Specialties

Jitter:                               Typical <1nSec for internal, Wordclock, AES (x)and MADI input
Jitter Suppression:          >30dB (2.4kHz)
Jitter Sensitivity:              All PLLs operate error-free even at 100nSec

SKU RME-DMC842
Brand RME
Weight 1.0100
Dimensions (WxHxD) 19" x 3.5" x 9.5"

Write Your Own Review

You're reviewing: RME DMC 842 Mic Pre-amp

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Rating

Deal Request

RME DMC 842 Mic Pre-amp

$4,199.00

Submit the price you are willing to pay for this item.

You will receive a quick response from our crew.

Or just call us now

(888) 890-6222

Please wait...