Brooklyn's #1 Source for Pro Audio & DJ Equipment

888-890-6222 // 718-522-1071 // 217 Russell St, Brooklyn, NY Map »

Call Us: 888-890-6222 // 718-522-1071


RME ADI-4 DD ADAT AES Converter

24 Bit / 96 kHz, 8-channel AES/EBU <> ADAT Converter, 9 1/2", 1HU

RME-ADI4DD_2

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • RME-ADI4DD_1
  • RME-ADI4DD_2
  • RME-ADI4DD_3
Brand New
Affirm Financing:
$949.00

Availability: In stock now

"Don't See The Deal You Want?" Request A Deal

Question about this item?

Call: 888-890-6222

.

Product Description for the RME ADI-4 DD ADAT AES Converter

The ADI-192 DD is the successor to the highly successful ADI-8 DD. The completely re-engineered device was designed to be the most powerful format and sample rate converter ever. Hence the ADI-192 DD not only features considerable improvements compared to the ADI-8 DD.

The unit consists of three 8-Channel format converters with 24-bit audio resolution. The three output formats ADAT, TDIF and AES independently access the three input formats ADAT, TDIF and AES schematic view. Thanks to free selection of inputs, signals can be copied and distributed between all connected devices - without the need to change any cables. Due to the unlimited input selection, the unit not only transfers data to the same output format.

Four XLR AES/EBU inputs and outputs each, and two ADAT and TDIF inputs and outputs allow full 8-Channel operation even at 96 kHz / 24-bit. At 192 kHz, there are eight AES channels and four ADAT and TDIF channels. Switchable 24/192kHz sample rate converters allow 8-Channel sample rate conversion and clock decoupling of the highest quality.

48 LEDs clearly display the current status of the incoming and outgoing signals and the processing performed within the unit. The SyncCheck technology known from other RME devices indicates whether the input signal is locked and whether all inputs are sychronized. The AES output signal can be given a consumer or professional status. The first AES output (channels 1/2) is also available as optical TOSLINK.

Professionals will love the fact that the ADI-192 DD supports Double Wire, Quad Wire, S/MUX and S/MUX4, making it compatible to all methods of increasing sample rates by sample multiplexing on all platforms. The unit can also convert between these formats, even along with SRC. If more than 8 channels are required, several units can be cascaded and synchronized sample-accurately by word clock.

The ADI-192 DD also features an automatic distribution mode. If only one of the four AES inputs is used, the device will copy these two channels to the other three AES outputs.

Features

  • Supports 192 kHz with ADAT, TDIF und AES
  • 8-Channel sample rate conversion up to 192 kHz
  • Sample Rate Conversion can be selected for AES, TDIF or ADAT
  • 8-Channel Sample Rate Conversion without phase errors (sub-sample synchronous)
  • SteadyClock for maximum jitter suppression and clock regeneration
  • Complete triple format converter AES/TDIF/ADAT with added SPDIF TOSLINK I/O
  • Direct support for Double and Quad Wire, S/MUX and S/MUX4
  • Also when using SRC
  • Special TDIF word clock output
  • Simplified and easy-to-use user interface
  • AES/EBU frontend for RME's digital I/O-cards (with ADAT optical I/O)
  • TDIF frontend for RME's digital I/O-cards (with ADAT optical I/O)
  • AES and ADAT frontend for DTRS machines
  • 8-Channel AES, TDIF and ADAT input and output for digital mixers with ADAT/TDIF port
  • Operation of four SPDIF or AES devices with different sample rates in any digital audio network
  • Converts Double and Quad Wire to Single Wire and vice versa, even with simultaneous sample rate conversion

Input AES/EBU: 4 x XLR, transformer balanced, highly sensitive input stage (< 0.3 Vpp), SPDIF compatible, max. 192 kHz Single Wire

Output AES/EBU: 4 x XLR, transformer balanced, 4.5 Vpp, max. 192 kHz Single Wire

Input ADAT optical: 2 x TOSLINK, 24-bit, Bitclock PLL

Output ADAT optical: 2 x TOSLINK, 24-bit

Input/Output TDIF: 2 x D-sub 25 pin, 24-bit

Input/Output SPDIF front: 2 x TOSLINK, 24-bit, max. 192 kHz

Input Word Clock: Signal Adaptation Circuit (functional from 1.2 Vpp)

Output Word Clock: BNC, low impedance driver stage, 4 Vpp into 75 Ohms, short-circuit-proof

Sync sources: Internal, ADAT optical in, AES/EBU in, TDIF in, word clock in

Varipitch: by input signal or word clock

Sample frequencies: 444.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, variable (sync/word clock)

Sample rate range: AES, word clock: 28 kHz-204 kHz, ADAT/TDIF 30 kHz - 54 kHz

Jitter: Internal clock < 1 ns, external clocks < 1 ns

Jitter sensitivity: all PLLs operate error-free even at 100 ns

Jitter suppression: >30 dB (2.4 kHz)

SRC dynamic ratio: 140 dB RMS unweighted, 143 dBA

SRC THD+N: < -140 dB

Sample rate ratio: max. 7:1 / 1:7

Power supply: Internal switching mode PS, 100V - 240V AC, 20 Watt

Dimensions: (WxHxD) 483 x 44 x 200 mm

Warranty: 2 years

SKU RME-ADI4DD
Brand RME
Weight 2.2000
Dimensions (WxHxD) 8.6" x 1.75" x 5.2"

Write Your Own Review

You're reviewing: RME ADI-4 DD ADAT AES Converter

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Rating

Deal Request

RME ADI-4 DD ADAT AES Converter

$949.00

Submit the price you are willing to pay for this item.

You will receive a quick response from our crew.

Or just call us now

(888) 890-6222

Please wait...