Shure ULXS14
Product Description for the Shure ULXS14
Need a professional wireless instrument system? Shure's ULXS14 has everything you need for a single channel of absolutely professional wireless instrument transmission. The ULXS14 package comes complete with a Shure ULXS4 wireless receiver, a ULX1 bodypack transmitter, and a WA302 instrument to bodypack cable. The WA302 locks into the ULX1 bodypack transmitter's TA4F mini XLR-style jack to give you a secure connection. The ULXS4 receiver makes setting up a snap with features like Auto Frequency Selection and over 1,400 selectable frequencies. With the ULXS14 package, you get completely uncompromising wireless value!
Shure ULXS14 Wireless Instrument System at a Glance:
- ULXS4 receiver makes setting up a snap!
- ULX1 and WA302 lock together for totally secure wireless instrument transmission
- ULX technology delivers amazing professional wireless
ULXS4 receiver makes setting up a snap!
The ULXS4 employs features that make setup almost effortless. Utilizing Auto Frequency Selection, the ULXS4 scans the wireless landscape and identifies a clear channel instantly. With over 1,400 selectable frequencies, adding channels or integrating your ULXS14 system into a preexisting wireless system is as simple as it gets.
ULX1 and WA302 lock together for totally secure wireless instrument transmission
The ULX1 bodypack transmitter presents is packed with useful features like, a timed backlit LCD, frequency and power lockouts, and a 300' (100m) operating range. One only one 9V battery, you can get up to nine hours of continuous use from the ULX1. The WA302 is a rugged cable whose TA4F connector snaps into the ULX1 securely, so you don't have to worry about becoming disconnected from your bodypack as you move around the stage. Its 1/4" connection will fit into any normal guitar, bass, or other instrument.
ULX technology delivers amazing professional wireless
Designed with the demands of professional live sound engineers and top-level performers in mind, Shure's ULX Wireless Systems offer all the right features to insure the best results. Shure's patented Audio Reference Companding technology that lets you transmit an incredible range of sound without losing any noticeable sonic quality. Set up is easy with conveniences like automatic synchronization. With ULX, you get only totally competitive wireless — and with the ULXS14, you get a killer deal on a complete ULX wireless instrument system.
Shure ULXS14 Wireless Instrument System Features:
- Operates on the M1 band
- Up to 300' of wireless freedom
- Automatic Frequency Selection
- 1,400 channels to choose from
- Up to nine hours of continuous use on one 9V battery
- Easy to ready LCD displays and intuitive function controls
Features
Channel Frequencies
Channel J1: 554 to 590 MHz
Channel M1: 662 to 698 MHz
System Includes: ULXS4 Standard Diversit Receiver, ULX1 Bodypack Transmitter, WA302 Instrument Cable
RF Carrier Frequency Range: 554.000 to 865.000 MHz (Available frequencies depend on the applicable regulations in the country where the system is used).
Refer to the frequency supplement supplied with the system.
Effective Range: 100 m (300 ft.) under optimal conditions
NOTE: Actual working range depends on RF signal absorption, reflection, and interference
Audio Frequency Response: 25 to 15,000 Hz, +/-2 dB
NOTE: Overall system frequency response depends on the microphone element.
*Output Level: Microphone Level = Line Level - 20 dB
Transmitter Audio Polarity: Positive pressure on microphone diaphragm (or positive volt-age applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1/4 in. output
Transmitter Gain Adjustment Range ULX1: 25 dB
Receiver Audio Output Level (+/-38 kHz deviation, 1 kHz tone):
XLR connector (into 600 ohm load): +3.9 dBV (line), -17dBV mic
1/4 in. connector (into 3000 ohm load): -2 dBV
Impedance:
ULX1: 1 Megohm
ULXS: 450 ohms at line level; 2000 ohms at mic level
Modulation:
+/-38 kHz deviation compressor-expander system with pre- and de-emphasis
FR Power output:
ULX1: 30 mW maximum
Dynamic Range: >100 dB, A-weighted
RF Sensitivity: 1.26 uV for 12 dB SINAD (typical)
Image Rejection: 80 dB typical
Spurious Rejection: 75 dB typical
Ultimate Quieting (reference +/-38 kHz deviation): >105 dB, A-weighted
System Distortion (reference +/-38 kHz deviation, 1 kHz modulation):
0.3% total harmonic distortion, typical
Power Requirements:
ULX1: 9V alkaline battery (Duracell MN1604 recommended); 8.4V Nicad optional
ULXS4: 14-18 VDC (negative ground), 550 mA
Battery Life:
8 to 9 hours (with 9V Duracell MN1604 alkaline battery)
Operating Temperature Range:
-20 to 49 degrees C (-4 to 120 degrees F)
Note: Battery characteristics may limit this range
Overall Dimensions (H x W x D):
ULX1: 96.5 x 67 x 26.7 (3.86 x 2.68 x 1.10 in.)
ULX4S: 43 x 214 x 163 mm (1.72 x 8.56 x 6.52 in.)
Net Weight:
ULX1: 79 g (2.8 oz.), without battery
ULXS4: 1049 g (2 lbs., 5 oz.)
| Brand | Shure |
|---|---|
| Weight | 5.0000 |
| Dimensions (WxHxD) | No |
| Show ''Call For Price'' | N/A |
Shure ULXS14Move your mouse over image or click to enlarge
(888) 890-6222
(718) 522-1071
Call Code:Have Questions?
Want lower pricing?
Call Us Now.
(Se habla Espanol)
We offer some of the best support in the industry. Talk to real musicians and audio professionals who live and work in Brooklyn, NY.
- Login
- Shopping Cart
Buy
- Facebook Page







































