Brooklyn's #1 Source for Pro Audio & DJ Equipment

888-890-6222 // 718-522-1071 // 217 Russell St, Brooklyn, NY Map »

Call Us: 888-890-6222 // 718-522-1071


Kemper Profiler + Remote

Guitar Profiling Amp with Remote

Kemper Profiler + Remote

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Brand New
Affirm Financing:
$2,479.00

Availability: In stock now

"Don't See The Deal You Want?" Request A Deal

Question about this item?

Call: 888-890-6222

.

Product Description for the Kemper Profiler + Remote

If you feel that you do not own first class tube amps worth to be profiled, no problem. There is actually no need to create your own profiles. The Profiler ships with hundreds of amps and rigs already installed. Profiled by pro musicians and engineers in top studios around the world, the premier selection of factory rigs grants you access to the rarest and finest amps on the planet.On top, we constantly refine, update and extend what’s to your disposal by licensing additional content and fine tuning the existing catalog. We care for a high versatility of the cultural background of the profiles, even in the same genre.

REMOTE

DESIGNED TO WORK SEAMLESSLY WITH PROFILER

Profiler Remote is the quintessential foot controller for your Profiler. We’ve spent a tremendous amount of time to create a versatile and yet easy to operate floor board. The tight integration in between Profiler and Remote allows you to control, administer and program without any knowledge about MIDI or delving through cryptic data sheets.

The large, illuminated display is designed to be looked at from a distance and Remote's housing is built like a tank. Just what the doctor orders for touring musicians on dark stages.

Five buttons allow you to directly access five different programs ("Rigs") and entire performance programs can be switched using a bank system. There are dedicated buttons to access the tuner, tap tempo in and enable the new, exclusive Looper Effect.

Remote connects via a single Ethernet cable to your Profiler. No extra power supply is required and the included cable is 7 meters long (21ft). Longer cables are possible as well.

Up to four continuous foot pedals can control multiple parameters inside your Profiler. Four buttons switch of stomps and effects. The programming required is easier to learn than putting a new contact into your cell phone. Click to choose, assign, done.

PROGRAMMING REMOTE

Four buttons, which can be assigned individually for every program, can control multiple stomp effects at the same time. In order to associate an effect with a button, all you need to do is: Press a stomp button on your Profiler and hold the button of your choice on Remote at the same time. Done.

MADE WITH TOURING IN MIND

Remote connects to Profiler with a single cable. We are using a Neutrik® etherCON® connector to ensure the most robust connection possible on stage. By using a powered ethernet hub, distances in excess of 100 meters (300ft) can be bridged with a simple Ethernet cable.

CONTROLLERS AND SWITCHES

The four TRS connectors on the rear panel can be used for continuous controllers and switches. Each controller can be freely assigned per program. Multiple assignments per controller are also possible. Status color LEDs give you a great overview on assignments and purpose of a switch/pedal.

ADMINISTER OTHER EQUIPMENT

Remote allows you to control external MIDI gear by sending program change messages utilizing the MIDI output of your Profiler.

Features

POWER AMP

  • PowerHead and PowerRack:
  • 600 Watts at 8 Ohm
  • 300 Watts at 16 Ohm

DIGITAL INPUTS AND OUTPUTS

  • S/PDIF In/Out 44.1 kHz (24 bit)
  • with RCA Phone connectors (Master only)

ANALOG INPUTS

Front Input:

  • ¼ inch TS unbalanced, dynamic range >108dB, impedance 1 MegOhm

Alternative Input:

  • ¼ inch TRS balanced with ground lift, dynamic range =105dB

Return:

  • XLR balanced, ¼ inch balanced with ground lift, dynamic range =105dB

ANALOG OUTPUTS

  • Master L and R Outputs:
  • XLR balanced, ¼ inch TS unbalanced with ground lift max. output level : XLR +22dBu, TS +16dBu
  • Monitor Output:
  • ¼ inch TS unbalanced with ground lift max. output level : +16dBu
  • Direct Output/Send:
  • ¼ inch TS unbalanced with ground lift max. output level : +16dBu
  • Output Dynamic Range:
  • >108 dB
  • Dedicated Headphone Output:
  • ¼ inch TRS stereo, 33Ohm

CONTROL AND DATA INTERFACES

  • Midi:
  • 5-pin DIN commectors for In/Out/Thru
  • Switch/Pedal:
  • Two 1/4 inch TRS, each for
  • mono/stereo switch or expression pedal
  • (10kOhm min, 100kOhm max. impedance)
  • Network:
  • RJ45 connector
  • USB:
  • USB 2.0 (FS) compatible device,
  • USB-A and USB-B connectors

ELECTRICAL REQUIREMENTS

  • Line Voltage:
  • Head/Rack 100-240V. AC, max. 0.5. A
  • PowerHead/PowerRack 100-125 or 190-245V. AC, max. 10. A
  • Frequency:
  • 50Hz to 60Hz, single phase

ENVIRONMENTAL REQUIREMENTS

  • Operating Temperature:
  • 10° to 35° C (50° to 95° F)
  • Non-operating Temperature:
  • -20° to 47° C (-4° to 116° F)
  • Relative Humidity:
  • 5% to 95% non-condensing
  • Maximum Altitudet:
  • 3000 m (10,000 feet)

ELECTRICAL APPROVALS

  • FCC Verification procedure – 47CFR §15.101
  • Other Class B digital devices and peripherals
  • EN 55022 Class B : 2006+A1:2007
  • EN 61000-3-2 : 2006 + A1:2009 + A2:2009
  • EN 61000-3-3 : 2008EN55024:1998 + A1:2001 + A2:2003
  • EN 55024 : 1998 + A1:2001 + A2:2003, 2010
SKU KEM-PROFILERRMT
Brand Kemper
Weight 10.0000
Dimensions (WxHxD) No

Write Your Own Review

You're reviewing: Kemper Profiler + Remote

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Rating

Deal Request

Kemper Profiler + Remote

$2,479.00

Submit the price you are willing to pay for this item.

You will receive a quick response from our crew.

Or just call us now

(888) 890-6222

Please wait...