Brooklyn's #1 Source for Pro Audio & DJ Equipment

888-890-6222 // 718-522-1071 // 456 Johnson Ave, Brooklyn, NY 11237 Map »

Call Us: 888-890-6222 // 718-522-1071

MXR M264 FET Driver

Overdrive Guitar Effects Pedal

MXR M264 FET Driver

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Brand New


Availability: In stock now

"Don't See The Deal You Want?" Request A Deal

Download the Proaudiostar APP for exclusive deals!


Question about this item?

Call: 888-890-6222


Product Description for the MXR M264 FET Driver

The FET Driver captures the rich, creamy sound of an overdriven tube amplifier with Hi and Lo boost/cut controls for tonal fine-tuning.

Featuring a unique circuit design, the MXR FET Driver captures the rich, creamy sound of an overdriven tube amplifier by cascading an op-amp gain stage into a FET stage. The FET Driver thickens up lead tones with musical, amp-like distortion and sustain without the fragility and inconsistency associated with tubes.

The FET Driver features a simple but responsive set of controls. Set your volume level with the Output control, and then use the Drive control to dial in the grit, from subtle soft-clipping to early stage distortion. Fine tune the FET Driver's sound by tweaking Hi and Lo boost/cut controls, and push the Hi Cut switch to roll off high end frequencies when playing in high volume situations where excess noise is apparent.

The FET Driver features true bypass switching and comes in a heavy duty metal housing that's ready for the road.



  • Organic, amp-like overdrive and distortion
  • Two-band EQ section for detailed shaping of distorted signal
  • True bypass switching


The MXR FET Driver is powered by one 9-volt battery (remove bottom plate to install), a 9-volt AC adapter such as the Dunlop ECB003/ECB003E, or a DC Brick power supply.


  • Run a cable from your guitar to the FET Driver’s INPUT jack and run another cable from the FET Driver’s OUTPUT jack to your amplifier.
  • Start with all controls at 12 o’clock.
  • Turn the effect on by depressing the footswitch.
  • Rotate the LEVEL knob clockwise to increase overall volume of effect or counterclockwise to decrease it.
  • When playing at loud volumes, the HI CUT switch can be used to roll off high frequencies for a rounder, slightly warmer sound.  Note that this frequency cut occurs at an earlier stage than any cutting or boosting from the HI and LO controls and therefore does not affect the behavior of either.
  • Rotate the HI knob clockwise to boost high frequencies or counterclockwise to cut them.
  • Rotate the LO knob clockwise to boost low frequencies or counterclockwise to cut them.
  • Rotate the DRIVE knob clockwise to increase amount of distortion or counterclockwise to decrease it.


  • Input Impedance : 1 MΩ
  • Output Impedance : 15 kΩ
  • Noise Floor* : -88 dBV
  • Bypass : True Hardwire
  • Current Draw : 25 mA
  • Power Supply : 9 volts DC


  • HI knob cuts or boosts high frequencies
  • LEVEL knob controls overall effect volume
  • HI CUT switch rounds off high frequencies when playing at high volumes (green LED indicates on)
  • DRIVE knob controls overall amount of distortion
  • LO knob cuts or boosts low frequencies
  • 6 FOOTSWITCH toggles effect on/ bypass (red LED indicates on)
Brand MXR
Weight 0.2900
Dimensions (WxHxD) No

Recommended Accessories

Deal Request

MXR M264 FET Driver


Submit the price you are willing to pay for this item.

You will receive a quick response from our crew.

Or just call us now

(888) 890-6222

Please wait...

Continue shopping
View cart & checkout
  • Loading,Please wait...

    PayPal Checkout