Brooklyn's #1 Source for Pro Audio & DJ Equipment

888-890-6222 // 718-522-1071 // 217 Russell St, Brooklyn, NY Map »

Call Us: 888-890-6222 // 718-522-1071


Galaxy Audio Cricket Polarity/continuity tester set

Speaker Polarity/continuity Cricket.

Galaxy Audio Cricket Polarity/continuity tester set

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Brand New
Affirm Financing:
$99.99

Availability: In stock now

"Don't See The Deal You Want?" Request A Deal

Question about this item?

Call: 888-890-6222

.

Product Description for the Galaxy Audio Cricket Polarity/continuity tester set

The CRICKET polarity tester is great for sound contractors, musicians, DJs, and many others. Polarity, should it become reversed, can play havoc with a sound system. If two sources are emitting the same electrical or acoustic tone (frequency), and one of those sources is in a state of inverted polarity, those tones, when combined at a given point, will cancel each other. This severely alters the sound of a system.

Polarity can be reversed while soldering cables, adding components to a sound system, reversing 'Banana' plugs, or replacing a component in a speaker cabinet improperly, to name a few instances. The purpose of the CRICKET is to test the polarity of a sound system each time it is used to insure it is working properly.

Galaxy Audio's battery powered CRICKET Polarity/Continuity Test Set makes it easy to determine whether every component in an audio system from patch bay to console to speakers is in or out of polarity. The CRICKET tests balanced and unbalanced cables of up to 2,000 feet in length. It will drive a “snake” (even one with transformers), and indicate which of a microphone's XLR connector pins is hot. The CRICKET can also plug directly into a speaker cabinet and drive the components. A glance at the CRICKET's red and green LED's can save hours of troubleshooting. No wonder it's an indispensable tool for sound system owners, operators, installers, and sound rental companies.

The CRICKET Polarity Tester is a two-piece unit ('Send' & 'Receive'). The Send unit generates a 'pulse', which is sent through the speaker, cable, microphone, or the device being tested. The Receive unit interprets that pulse and indicates if that pulse is positive or negative. The bottom of each unit has a quick reference guide on how to understand the readings given. The CRICKET Polarity Test Set is easy to use, necessary to own, and not a lot of money. The CRICKET is suggested for anybody working with sound systems.

  • Checks continuity and polarity
  • 1/4" TRS and XLR in/out
  • Tests speakers, mics, cables and wireless systems
  • Tests mixers and signal processors for polarity inversions
  • Internal speaker for testing mic polarity
  • Internal mic for testing speakers
  • High level output for testing miles of cable
  • Battery test on Receive module saves troubleshooting time

Features

  • Cricket Send Pulse Generator Pulse Waveform Polarity : Positive-going balanced line output pulse, switch selectable for hi or low level balanced signal with positive pressure produced at the tip of 1/4" jack and pin #2 of XLR jack
  • Cricket Send Pulse Generator Speaker Output Pulse : Accepts 2 ohm (or greater) load with positive pressure produced at the tip of a 1/4" speaker jack and positive terminal of an internal speaker
  • Cricket Send Pulse Generator Dimensions : 3.375"W x 1.812"H x 6.25"L
  • Cricket Send Pulse Generator Weight (with battery) : 1.10 lbs. (.5 kg.)
  • Cricket Send Pulse Generator Battery : 9 volt, alkaline only
  • Cricket Receive Pulse Detector LED Indicators : Green: indicates positive-going pulse polarity with power switch in “ON” position and battery status with power switch in “BAT” position.
  • Red : indicates negative-going pulse polarity.
  • Cricket Receive Pulse Detector Detection Inputs : one 1/4", balanced; one XLR, balanced
  • Cricket Receive Pulse Detector Mic Sensitivity : -64 dB, +3 dB
  • Cricket Receive Pulse Detector Weight (with battery) : 1.02 lbs. (0.46 kg.)
  • Cricket Receive Pulse Detector Battery : 9 volt, alkaline only
  • Cricket Receive Pulse Detector Switches : Internal microphone for testing speaker output
  • Polarity/Continuity Test : Female XLR pin 2,3,1 continuity; 1/4" jacks: tip, ring, sleeve continuity
  • Test Set Shipping Weight : 3 lbs. (1.36 kg.) .75" (127mm x 63.5mm x 44.45mm)
  • Weight : less than 3/4 lbs.
SKU GAL-CPTS
Brand Galaxy
Weight 15.0000
Dimensions (WxHxD) No

Write Your Own Review

You're reviewing: Galaxy Audio Cricket Polarity/continuity tester set

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Rating

Deal Request

Galaxy Audio Cricket Polarity/continuity tester set

$99.99

Submit the price you are willing to pay for this item.

You will receive a quick response from our crew.

Or just call us now

(888) 890-6222

Please wait...