Brooklyn's #1 Source for Pro Audio & DJ Equipment

888-890-6222 // 718-522-1071 // 217 Russell St, Brooklyn, NY Map »

Call Us: 888-890-6222 // 718-522-1071

Fluid Audio F5 Active Monitors, White (Pair)+Focusrite Scarlett 2i2+ Cable

Audio F5 Active Monitors, White (Pair), The 2 in / 2 out USB recording interface w/Scarlett Plugin Suite With To connect gear with stereo unbalanced phone jacks

Fluid Audio F5 Active Monitors, White (Pair)+Focusrite Scarlett 2i2+ Cable

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Affirm Financing:

Regular Price: $459.79

Special Price: $429.79

Availability: In stock now

"Don't See The Deal You Want?" Request A Deal

Question about this item?

Call: 888-890-6222


Product Description for the Fluid Audio F5 Active Monitors, White (Pair)+Focusrite Scarlett 2i2+ Cable

Product Description For  Fluid Audio F5 Active Monitors, White (Pair) + Focusrite Scarlett 2i2 + Hosa Stereo Interconnect, Dual 1/4 in to Same, 3m

Package Includes

1 x Fluid Audio F5 Active Monitors, White (Pair)

1 x Focusrite Scarlett 2i2

1 x Hosa Stereo Interconnect, Dual 1/4 in to Same, 3m

Fluid Audio F5 Active Monitors, White (Pair)

The F5 studio monitor is the model that started it all for Fluid Audio. When we decided to enter this market, we wanted to address many of the issues found with monitors at this price point. We didnt realize that so many others would want the very same thing!IFrameWhile it is often referred to as a budget monitor, the F5 brings a lot of technology and value to the table. The amplifier rear panel has not only XLR and TRS inputs for more professional applications, we have also included an RCA input for more consumer friendly applications. The amplifier has a generous heat sink for long mixing sessions. Most monitors have their amp heat sinks inside the cabinet where all the heat is generated and cannot escape. The F5 amplifier ICs are mounted directly to the heat sink, so heat can transmit harmlessly away from the drivers and internal circuitry. The amp also has something no other monitor in its class can boast  A standby circuit that shuts down the amp after 20 mins of non use. This may not seem like much of a feature, but we are all concerned with being green and conserving energy in this day and age. This is our small contribution. While the amplifier is extremely important, all of the sound radiates from the front baffle, where the drivers and port are mounted. The woofer uses a paper pulp composite cone, which has a curve-linear geometry and is mounted to a well damped butyl rubber surround. All this contributes to a very well controlled woofer response that integrates seamlessly with the tweeter. The tweeter itself is a treated silk material, which means its very light, very fast and provides just the right amount of articulation and air to high frequencies. The tweeter is mounted in a custom designed wave guide that is a perfect balance between optimizing the low end response of the device, and a great off-axis response in the near field. The well reinforced MDF cabinet minimizes resonances, and the front mounted bass-reflex port allows the bass energy to radiate directly towards the listener. And unlike many other monitors in its class, there is a volume control on the front baffle for easy access. All of these features come together to create a great sounding yet transparent listening and mixing experience¦at a great price.

 Focusrite Scarlett 2i2

The Scarlett 2i2 is a 2 in / 2 out USB recording interface featuring two award-winning Focusrite preamps. Housed in an attractive anodised aluminium unibody chassis, the interface not only sounds fantastic but looks great too. What’s more it’s solid enough to take on the road when you travel. The Scarlett 2i2 is much more than just a pretty metal box.

25 Years of experience

For more than 25 years, Focusrite has designed some of the most popular microphone preamps in the industry. This experience has been used to create the transparent, low-noise and low-distortion preamp found not only in the Scarlett 2i2 but also our flagship Firewire interface, the Liquid Saffire 56. Plenty of available headroom makes it suitable for moving coil, condenser and ribbon microphones regardless of the source. Phantom power is provided for mics that need it.

Plug straight in

The front panel Neutrik combination input can be used to connect line and instrument level signals as well as microphones. This makes it perfect for recording the output of a synthesizer or stage piano, whilst at the flick of a switch you can cater for the output of an electric or acoustic guitar.

Keep an eye on your levels

Unique halo signal indicators let you know that you’ve got a good signal level for recording. Red means that your signal is clipping, and that you should reduce the gain. The halo will momentarily turn amber as the level returns to a healthy level, at which point it will turn green.

Flexible monitoring options

A large monitor dial provides a tactile control for the volume of your speakers, whilst a high quality headphone amp provides a clean yet loud signal to headphones connected to the front panel socket. The direct monitor switch routes audio directly from the inputs to both the headphone and speaker outputs. This allows you to monitor the incoming signal with zero-latency.

Polish your mix

The included Scarlett Plug-In suite provides effects compatible with all major DAWs; so whether you're using GarageBand, Pro Tools 9, Cubase, Logic or the included Ableton Live Lite, Scarlett 2i2 is the complete package for you to get recording straight away.

Hosa Stereo Interconnect, Dual 1/4 in to Same, 3m

This cable is designed to interconnect gear with left and right stereo balanced phone jacks. It is ideal for use in a variety of professional and consumer applications.


Fluid Audio F5 Active Monitors, White (Pair)

  • Frequency response : 49 Hz  22 kHz
  • Crossover frequency : 2.5 kHz
  • Low-frequency amplifier power : 40 watts
  • High-frequency amplifier power : 30 watts
  • Signal-to-noise : > 100 dB (typical A-weighted)
  • Polarity : Positive signal at + input produces outward LF one displacement
  • Input impedance : 20 k ohms balanced, 10 k ohms unbalanced
  • Input sensitivity : 85 mV pink noise input produces 90dBA output SPL @ one meter with volume control at maximum (101dB Max SPL)
  • Power : 115V ~50/60 Hz or 230V~50/60 Hz user switchable
  • Protection : RF interference, output current limiting, over temperature, turn-on/off transient, subsonic filter, external mains fuse
  • Cabinet : Vinyl-laminated MDF
  • Size (single monitor) : 10.25 x 6.9 x 7.7 (260 x 176 x 195 mm)
  • Weight (single monitor) : 11 lbs (5 kg)

Focusrite Scarlett 2i2

Analogue Input Performance


  • Frequency Response : 20Hz - 20kHz +/- 0.1 dB
  • THD+N : -100dB (minimum gain, -1 dBFS input with 20 Hz - 20 kHz filter)
  • Equivalent Input Noise (EIN) : -127 dB : measured at maximum gain with 150 Ohm termination (20 Hz - 20 kHz filter)
  • Gain Range : -4 dB to + 46 dB
  • Max Input Level : +4dBu


  • Frequency Response : 20Hz - 20kHz +/- 0.1dB
  • THD+N : -91dB (measured at minimum gain with -1 dBFS input and 20 Hz - 20 kHz filter)
  • Noise : -104 dBu (measured at minimum gain, with a 20 Hz - 20 kHz filter)
  • Signal to Noise Ratio : > 100dB
  • Gain Range : -21 dB to +29 dB
  • Max Input Level : +20dBu


  • Frequency Response : 20Hz - 20kHz +/- 0.1dB
  • THD+N : -72dB (measured at minimum gain with -1dBFS signal and 20 Hz - 20 kHz filter)
  • Noise : -87dBu (20Hz/20kHz bandpass filter)
  • Gain Range : -4dB to +46 dB
  • Max Input Level : +4dBu

Analogue Output Performance

  • Nominal Output Level : 0dBFS = 10dBu, balanced
  • Frequency Response : 20Hz - 20kHz +/- 0.2dB
  • THD+N : -100dB (measured with -1dBFS input and 20Hz - 20 kHz filter, unweighted)
  • Output Impedance : < 10Ω
  • Power Output into 150Ω : 15mW
  • Power Output into 50Ω : 30mW

Digital Performance

  • Clock sources : Internal clock only
  • A-D Dynamic Range : 105dB 'A-weighted' (all inputs).  Converter chipset A-D dynamic range 114dB
  • D-A Dynamic Range : 104dB 'A-weighted' (all outputs).  Converter chipset D-A dynamic range 114dB
  • Supported sample rates : 44.1 KHz, 48 KHz, 88.2 KHz, 96 KHz


  • Input to Input : Better than 90dB
  • Output to Output : Better than 90dB
  • Input to Output : Better than 85dB

Input Metering

  • Ring LED lit Green : Signal present (-24 dBFS)
  • Ring LED lit Red : Signal overload (0dBFS), peak held for approximately 1 second

Weight and Dimensions

  • Height : 45 mm / 1 ¾ “
  • Width : 175 mm / 7”
  • Depth : 100 mm / 4”
  • Weight : 580 g / 1.3 lbs

Hosa Stereo Interconnect, Dual 1/4 in to Same, 3m

  • Nickel-plated plugs for rugged durability and efficient signal transfer
  • Oxygen-Free Copper (OFC) conductors for enhanced signal clarity
  • OFC spiral shields for effective EMI and RFI rejection and flexibility
Brand Fluid Audio
Weight 15.0000
Dimensions (WxHxD) No

Write Your Own Review

You're reviewing: Fluid Audio F5 Active Monitors, White (Pair)+Focusrite Scarlett 2i2+ Cable

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars

Deal Request

Fluid Audio F5 Active Monitors, White (Pair)+Focusrite Scarlett 2i2+ Cable


Submit the price you are willing to pay for this item.

You will receive a quick response from our crew.

Or just call us now

(888) 890-6222

Please wait...