0 $0.00

Elektron Analog Drive + MXR M169 Carbon Copy + Patch Cables

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Elektron Analog Drive + MXR M169 Carbon Copy + Patch Cables

Analog Distortion Stomp Box with Analog Delay Pedal and 3x 0.5ft Cables

Bundle

Regular Price: $526.98

Special Price: $319.99

Availability: In stock now

"Don't See The Deal You Want?" Request A Deal

  • Google Playstore
  • Apple store

Bundles That Include This Item

Product Description for the Elektron Analog Drive + MXR M169 Carbon Copy + Patch Cables

Package Includes:

1 x Elektron Analog Drive

1 x MXR M169 Carbon Copy

1 x Planet Waves Patch Cable 3-Pack

Elektron Analog Drive

Total analog distortion box

The sheer sonic range of the Analog Drive, courtesy of the eight different analog distortion circuits, is in itself a marvel. One stompbox harboring so many tone shaping opportunities: unheard of until now. Analog Drive is a bottomless well of new sounds.

The EQ touch

Enhance your amp with the 3 band analog EQ. The mid band is sweepable, which is very handy for dialing in the perfect EQ setting. The mid EQ can also be controlled with an expression pedal, making it easy to create analog wah-like sounds.

For the live rig

The possibility to store user presets will make the live gig flow smoothly. And if you rely on MIDI during your performances, the Analog Drive delivers. All settings are fully controllable via MIDI and it can even send MIDI program change messages.

MXR M169 Carbon Copy

The Carbon Copy Analog Delay delivers rich, warm bucket-bridgade delay with up to 600ms of delay time and modulation.

Go from crisp bathroom slap echoes to epic, Gilmouresque delays with the MXR Carbon Copy Analog Delay. Featuring 600ms of delay time with optional modulation, and a three-knob layout that controls Delay, Mix, and Regen. In addition, there are two internal trim pots that offer user-adjustable width and rate control of the modulation for even more tonal options. All done by a completely analog audio path for authentic rich, warm analog delay-made possible only by old-school analog bucket brigade technology. True bypass.

Planet Waves Patch Cable 3-Pack

Planet Waves 3-Pack 6 Inch Patch Cable PW-CGTP-305.our exclusive In=Out technology, Planet Waves cables offer extremely low capacitance for pure signal transparency. Classic Series cables nickel-plated plugs, ultra-pure oxygen-free copper conductors, dense shielding that virtually eliminates triboelectric (handling) noise, and molded strain relief for ultimate durability. All Planet Waves.

Features

Elektron Analog Drive

Sound processing

  • 100% analog signal path
  • 8 analog distortion circuits
  • 3 band analog EQ with sweepable mid band

Audio input

  • High impedance instrument input

Expression pedal inputs

  • Input level on tip : -5 V – +5 V
  • Supplies +5 V on ring
  • Accepts Expression pedals and Control Voltage

Electrical specifications

  • Unit power consumption : 5 W, 400 mA typical
  • Compatible Elektron power supply : PSU-3b

Hardware

  • Dual digit seven-segment LED display
  • MIDI In/Out
  • 1/4” audio input
  • 1/4” audio output
  • 2 x 1/4” Expression pedal input
  • Power inlet : Center positive 5.5 x 2.5 mm barrel jack, 12 V DC, 1 A

Physical specifications

  • Sturdy cast aluminum casing
  • Dimensions : W 171 x D 177 x H 62 mm (6.8” x 7.0” x 2.5”) (including jacks, knobs and footswitches)

MXR M169 Carbon Copy

Description

  • 100% analog bucketbrigade technology
  • Up to 600ms of delay with switchable modulation
  • Internally adjustable modulation circuit
  • True bypass

Power

The MXR Carbon Copy Analog Delay is powered by one 9-volt battery (remove bottom plate to install), a 9-volt AC Adapter such as the Dunlop ECB003/ECB003EU or a DC Brick  power supply.

Directions

  • Run a cable from your guitar to the Carbon Copy’s INPUT jack and another cable from the Carbon Copy’s OUTPUT jack to your amplifier.
  • Start with all controls at 12 o’clock.
  • Turn the effect on by depressing the footswitch.
  • Rotate the REGEN knob clockwise to increase the number of repeats or counterclockwise to decrease it.
  • Rotate the MIX knob clockwise to increase the ratio of wet to dry signal or counterclockwise to decrease it. Fully clockwise results in 100% wet signal while fully counterclockwise results in  100% dry signal.
  • Rotate the DELAY knob clockwise to increase delay time or counterclockwise to decrease it.
  • Push in the MOD switch to add modulation to your delay signal. Modulation width and speed  can be adjusted internally with a 2mm slotted screwdriver

Specifications

  • Input Impedance : 1 MΩ
  • Output Impedance : 1 kΩ
  • Max Input Level : +5 dBV at 500 Hz
  • Max Output Level : +8 dBV
  • Noise Floor*
  • Mix at Max CW : -96 dBV
  • Mix at Max CCW : -104 dBV
  • Delay Distortion : <1% at 1 kHz,
  • -5 dBV Input
  • Delay Time : 20 ms to 600 ms
  • Noise Reduction : 2:1 ratio
  • Modulation Speed : 0.2 Hz to 2.2 Hz
  • Bypass : True Hardwire
  • Current Draw : 26 mA
  • Power Supply : 9 volts DC

Controls

  • MOD switch toggles modulation on/off (blue LED indicates on)
  • MIX knob controls blend of wet and dry signals
  • REGEN knob sets number of repeats
  • DELAY knob sets delay time
  • FOOTSWITCH toggles effect on/bypass (blue LED indicates on)

Planet Waves Patch Cable 3-Pack

  • Abrasion resistant outer jacket
  • Ultra-fine stranded premium-quality copper 16 AWG conductors
SKU ELK-ANALOGDRIVE-BUN4
Brand Elektron
Weight 88.0000
Dimensions (WxHxD) No

.

Deal Request

Elektron Analog Drive + MXR M169 Carbon Copy + Patch Cables

$526.98

Submit the price you are willing to pay for this item.

You will receive a quick response from our crew.

Or just call us now

(888) 890-6222

Please wait...

Continue shopping
View cart & checkout
  • Loading,Please wait...

    PayPal Checkout
Continue shopping
View cart & checkout