Product Description for the Rane SIXTY-TWO
Turntablism is alive and more creative than ever. Rane and Serato are proud to be supporting partners in that creativity with the introduction of the Rane Sixty-One and Sixty-Two Mixers for Serato Scratch Live. For more than a decade, artists have chosen innovative Rane instruments to advance their art and three generations of TTM series mixers have been the top pick for many of the world's best performers. These mixers more tightly integrate performers, music, software, and hardware. The artist adds the passion, imagination and skills.
The Sixty-Two is a plug-and-play package supporting two computers, two-deck digital vinyl simulation, SP-6 sample player, software and hardware effects and all the record and playback channels you need. Software controls for Library, Loops, Cues and SP-6 are laid out for fast and intuitive access. Choose the Sixty-Two and join a community of users dedicated to advancement of the art.
The Sixty-Two Mixer supports both analog and Digital Vinyl Simulation (DVS) playback. The mixer is bundled with Serato Scratch Live and includes a fully integrated MIDI controller for software controls.
A typical setup includes operation with two Scratch Live DVS channels, SP-6 sample player on an independent USB Aux playback channel and Software effects enabled on the USB digital insert in the FlexFx loop. This setup also allows recording PGM1 post-fader, PGM2 post-fader and the Main mix.
The Headphone output is available on both 1/4 inch and 3.5 mm TRS jacks.
Cueing can pan between Cue & Main Mix, or Split Cue operation.
The program channel up-faders and crossfader each have their own contour controls that let you adjust between a slow fade or a fast cut. Each fader also has a reverse switch.
PGM Inputs 1-4
The Sixty-Two has four stereo analog inputs for PGM 1 through PGM 4. Any of these analog inputs may be set for Phono or Line Input using the PH - CD switches. Any of the four analog inputs may be used for Scratch Live vinyl emulation control. Input 1 or Input 2 may be selected for Scratch Live Virtual Deck 1 control. Input 3 or 4 may be selected for Scratch Live Virtual Deck 2 control. Control input sources are selected in Scratch Live.
The Mic Input accepts an XLR or a balanced or unbalanced 1/4" plug. The Mic has a switchable line level option to connect a wireless receiver.
All analog outputs come from the same “Main Mix” signal. Main, Booth and Session outputs each have their own Level control. The Main output comes from balanced XLR jacks. The Booth output is on balanced 1/4" TRS (tip-ring-sleeve) jacks, though unbalanced TS (tip-sleeve) plugs may be used. The Session output is on regular unbalanced RCA jacks. Because all signals are identical, users may use any of these outputs as the “main” output if a different cable type is required for connection.
- Phono or Line level input Rear panel switches for each input
- Phono Response RIAA +/-1 dB, Gain: 30 dB at 1 kHz
- Max Phono Input 150 mV
- Max Line Input 4 Vrms
ADCs 24-bit, 48 kHz; Dynamic range 101 dB A-weighted
DACs 24-bit, 48 kHz; Dynamic range 107 dB A-weighted
Digital Signal Processing 48 kHz, 32-bit floating point
USB Audio Six Stereo Record, Four Stereo Playback; 48 kHz, 32-bit floating point
FlexFX Return Stereo unbalanced 1/4" TS (tip-sleeve) phone jack
- Send Stereo unbalanced 1/4" TS phone jack
Mic Input Balanced 1/4" TRS & XLR combination jack
- Tone Controls 2-band, High and Low
- Mic-Line level switch Choose Line to connect wireless receiver
Line Outputs: Frequency Response 20 Hz to 20 kHz +/-0.25 dB, Line in to
- THD+N <0.01 re 0 dBFS, 20 to 20 kHz, 20 kHz BW
- Unbalanced jacks (RCA & FlexFX) Maximum 4 Vrms
- Balanced jacks (Main and Booth) Maximum 8 Vrms
Internal Universal Power Supply 100 to 240 VAC, 50 Hz to 60 Hz, 15 W max
USB Power Mixer is self-powered
Unit Size: 14.25" x 10.5" x 4" (36.2 cm x 26.7 cm x 10.2 cm)
- Weight 10 lb (4.3 kg)
Shipping Size 7.75" H x 15" W x 19.25" D
(19.7 cm x 38.1 cm x 49 cm)
- Weight 14 lb (6.4 kg)
Scratch Live System RequirementsPLEASE NOTE: These are the minimum requirements to run Scratch Live. For best performance and for use in professional situations we recommend you buy a higher spec computer. We also recommend Intel processors.
- Available 2.0 USB port.
- 1024 x 768 screen resolution.
- 5400 RPM hard drive. 7200 RPM for high-resolution audio playback.
- 2 GB RAM (a large library will like more RAM).
- Intel 1.83 GHz Core Duo or better.
- OSX 10.5.8 or higher.
- Intel processor, 2.2 GHz Core Duo or better.
- Windows XP with Service Pack 3 or higher.
- Windows Vista with Service Pack 2 or higher.
- Windows 7, recommended over Vista.
Note 1: Please read the FAQs at serato.com/support/scratchlive first if you are looking at buying a new computer.
Note 2: If you are using Scratch Live 2.x's more system intensive features such as DJ FX or AUX Deck plugins and are having issues you may need a higher spec computer for best results or make sure you have optimized your system: Windows 7 and Vista / Mac OS X.
|Show ''Call For Price''||N/A|
Rane Sixty Two: ProAudioStar First Look NAMM 2012
RANE SIXTY-ONE vs. SIXTY-TWO Comparison