Brooklyn's #1 Source for Pro Audio & DJ Equipment

888-890-6222 // 718-522-1071 // 456 Johnson Ave, Brooklyn, NY 11237 Map »

Call Us: 888-890-6222 // 718-522-1071


Darkglass Electronics Microtubes 900

900W Class D Bass Head

Darkglass Electronics Microtubes 900

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Brand New

$999.95

Availability: In stock now

"Don't See The Deal You Want?" Request A Deal

Download the Proaudiostar APP for exclusive deals!

 

Question about this item?

Call: 888-890-6222

.

Product Description for the Darkglass Electronics Microtubes 900

The Microtubes 900 is a 900W amplifier equipped with an all analog preamplifier and a Class D Power Module. The first thing you will notice from the Microtubes 900 is its unusual control layout: On the right side you’ll find the clean section which is the foundation of your tone. It features Gain and Master controls an active 4 band EQ. Along with Low and Treble controls you will find Low Mids and Hi Mids control, each knob with their own 3-way frequency switch. On the left side you will find the Microtubes® Engine which acts as an extra channel that can bring your clean tone to the next level by helping you cut through the mix while adding anything from subtle tube break up, harmonics and natural compression to obliterating distortion.

Features

Front Panel Features

Input

  • Connect your instrument via a standard ¼” mono cable.

Passive/Active

  • Switch from passive to active mode. Some active basses can have a hotter signal output which can make the amp distort early (feel free to use it on Passive move even with active basses if such additional distortion is desired).

Microtubes

  • Turns on or off the Microtubes Engine to add natural compression, organic harmonic enhancement, and saturation ranging from mild overdrive to high gain bass rage.
  • The Microtubes Engine operates before the clean section (you can therefore use the 4 Band Active EQ for additional tone shaping in addition to the Tone knob described below).

Drive

  • Controls the amount of distortion that the Microtubes Engine will deliver. It will change from a soft warm overdrive to a massive modern distorted tone.

Tone

  • Controls the high harmonic content of the Microtubes Engine via a variable low pass filter: crank it up for additional attack and definition or dim it down for a smoother sound. This is handy if running bright clean EQ settings or cabinets with tweeters.

Level

  • Controls the Microtubes Engine’s output volume.

Blend

  • Mixes between the Clean signal and the Distortion signal (Microtubes Engine).

B3K/VMT

  • Selects between two overdrive voicings: B3K mode will deliver an aggressive, percussive sound while the VMT will bring up the mids for a warmer, more neutral character.

Gain

  • Changes the volume of the signal the Active 4 Band EQ. You can set it low prior to ensuring the cleanest operation possible or set it higher for more aggressive growl.

Bass

  • 12dB at 80Hz. Changes the low content of the signal.

Low Mids

  • 12dB of the selected frequency via the LOW MIDS  switch (described below). Changes the lower mid content of the signal.

Low Mids

  • Use this switch to change the frequency of the low mid band from 250Hz, 500Hz or 1kHZ.

Hi Mids

  • 12dB of the selected frequency via the HI MIDS  switch (described below). Changes the higher mid content of the signal.

Hi Mids

  • Use this switch to change the frequency of the hi mid band from 750Hz, 1.5kHz and 3kHZ.

Treble

  • 12dB at 5kHz. Changes the high content of the signal.

Master

  • Controls the overall volume of the amplifier.

Mute

  • Mutes the amplifier.

Dimensions

  • 26.7x23x6.4 cm (10.5x9.05x2.52 in)

Back Panel Features

Speaker Output

  • Connects the amplifier to your cabinet. This Speakon combo jack allows for either Speakon or ¼” speaker cable operation.

Min-Load

  • Press when using a 2Ω load. You can use this control to lower the output if your 4Ω cabinet is not able to handle more than 500W (you can also get 350W with an 8Ω cabinet in this configuration).

Pre Amp Out

  • This output connects the preamp to a different power amp.

Power Amp In

  • Use this input to connect a different preamp to the power amp. (master volume will be disabled)

Post-Pre

  • Selects what signal will be delivered by the DI output. Selecting PRE, sends a clean copy of your input bass signal. Selecting POST delivers a signal processed by the preamp of the amp (gain, distortion, eq, master, etc.)

Ground Lift

  • Lifts the ground of the DI XLR output. If a ground noise in you DI signal is experienced, try changing the setting of this control.

Balanced Output

  • Connects the Microtubes 900 preamplifier to balanced equipment (mic preamp, console, recorder, compressor, audio interface, etc.) via a standard XLR jack.

Footswitch

  • The Footswitch allows you to remotely engage and disengage the Microtubes Engine. Hold the footswitch to Mute the amplifier. The VMT/B3K push button will remain operational with the Intelligent Footswitch plugged in.
  • Use a regular mono instrument cable to connect the amplifier to the footswitch.
  • Remove the cable from the footswitch jack in the rear panel if you want to control the amp from the front panel.
  • The Microtubes 900 will only work with our proprietary Intelligent Footswitch (included with the amplifier). A generic Footswitch will not work with the Microtubes 900.

AC Socket

  • Connects the power cord to the amplifier.

AC Power ON/OFF

  • Turns the amplifier on or off
SKU DGL-MICRO900
Brand Dark Glass
Weight 5.0000
Dimensions (WxHxD) No

Write Your Own Review

You're reviewing: Darkglass Electronics Microtubes 900

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Rating

Deal Request

Darkglass Electronics Microtubes 900

$999.95

Submit the price you are willing to pay for this item.

You will receive a quick response from our crew.

Or just call us now

(888) 890-6222

Please wait...

Continue shopping
View cart & checkout
  • Loading,Please wait...

    PayPal Checkout