-Touchstrips for navigating tracks
-Swipe tracks backwards and forwards as if you were touching the screen
-You can instantly ‘Drop’ into a tune at any point in the track
-'Slicer' Performance Mode
-Slicer allows you to chop-up beats in time and re-arrange them on the fly
-2 x 8 large Triggerpads let you to play eight rolling beat slices in any order
-Tough and compact with a 2 in 4 out high-quality audio interface
-Designed for gigging: Compact casing, bus powered with LED buttons
-Balanced outputs, ultra-reliable audio/MIDI drivers and microphone input
-Master FX and 'Fader FX Mode'
-Add different effects to either or both channels with TWITCH's FX section
-Use both channel faders for super-fast FX moves and tricks
-Trigger Hot Cue Points and 2 different Loop Modes
-8 large Triggerpads can fire off 8 cue-points anywhere in your track
-Trigger 8 different loop lengths and save them with your performance

Specifications:

Mixer section:
8x pots: EQ and trim
2x channel faders
1x replaceable crossfader
2x Continuous rotary encoders
2x headphone assign buttons - enables respective deck in the cue mix
2x Fader FX assign buttons
Master section:
4x pots
Headphone level
Master/cue mix
Booth level
Master output
Controls per deck:
Touchstrip with swipe and drop modes
Continuous rotary encoder for pitch +/-
Cue button
Play/Pause button
8x Large Triggerpads
4x performance mode selector buttons
2x Beatgrid buttons
2x sync/keylock buttons
Master FX section:
1x Pot
2x continuous rotary encoders - right hand is also tap tempo/left hand is pressing makes for secondary parameter control
6x FX select buttons
Mic/Aux input section:
1x pot
1x on/off button
1x assign to headphones button
Audio Interface - 24bit at 44.1/48KHz:
2x master outs (L/R) on balanced TRS jacks
2x booth outs (L/R) on phono jacks
2x aux input (L/R) on phono jacks
1x aux gain pot
1x direct monitoring switch
1x mic input on TRS jack
1x mic gain pot
2x headphone outputs (1x TRS jack and 1x 3.5mm jack) both can be used simultaneously)
1x Master/cue switch to change signal going out of Booth outputs between cue and main
1x direct monitoring output - bypasses the software and passes mic/aux input straight to the main outs