Brooklyn's #1 Source for Pro Audio & DJ Equipment

888-890-6222 // 718-522-1071 // 217 Russell St, Brooklyn, NY Map »

Call Us: 888-890-6222 // 718-522-1071


Aviom AN-16/o v.4

16-Channel Output Module w/DB-25 Connectors

Aviom AN-16/o v.4

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Brand New
Affirm Financing:
$1,360.00

Availability: In stock now

"Don't See The Deal You Want?" Request A Deal

Question about this item?

Call: 888-890-6222

.

Product Description for the Aviom AN-16/o v.4

The AN-16/o v.4 Output Module connects to any Pro16 input module, console card, or A-Net distributor and provides 16 balanced TRS line-level analog outputs. Five output levels, from mic to +24dBu, are available to easily accommodate the level requirements of the gear its output signals are being connected to.

Use the AN-16/o v.4 anywhere analog outputs are required: on stage or at FOH in a digital snake, in the studio, for a recording split, or in even the most complex audio networks. Adding a digital split to a Pro16 system is as simple as connecting an additional AN-16/o v.4 Output Module.

Product Details

The AN-16/o v.4 Output Module is a 1U rack-mount 16-channel digital-to-analog converter for Pro16 digital snake and audio distribution systems. Digital audio  transmitted to the AN-16/o v.4 via Aviom's A-Net Pro16 digital audio transmission protocol is converted to analog using 24-bit, 48kHz converters.

Sixteen balanced outputs are provided on the rear panel via DB25 multipin connectors. The analog outputs can be set (per channel pair) to +24dBu, +18dBu, +4dBu, or mic level.

Connecting to Wireless In-Ear Monitors

In personal mixing systems using the A360 Personal Mixer with the D800 or D800-Dante A-Net Distributors, the AN-16/o v.4 simplifies connections to wireless IEM systems. Each A360 Personal Mixer sends its stereo mix output back into the network which appears as a pair of channels on the AN-16/o v.4. Each AN-16/o v.4 supports up to eight A360s. Simply patch the analog outputs on the AN-16/o v.4 into the IEM transmitter's inputs. No analog cables are required at the A360 on stage.

Digital Snakes and Audio Networks

Use the AN-16/o v.4 anywhere analog outputs are required: on stage or FOH in a digital snake, in the studio, for a recording split, or in even the most complex audio networks. Adding a digital split to a Pro16 system is as simple as connecting an additional AN-16/o v.4 Output Module.

The AN-16/o v.4 can be connected to a Pro64 digital snake or audio network by adding the ASI A-Net Systems Interface.

Features

Audio Outputs :

  • 16 channels, balanced

Outputs

  • DB25 multipin connectors (2); Tascam analog audio pinout
  • Impedance balanced output for mic, +4dBu, and +18dBu; differential output for +24dBu

D/A Conversion

  • 48kHz sample rate, 24 bit

Frequency Response :

  • 4Hz-22kHz

A-Net Input/Output :

  • one EtherCon Category 5 (RJ45 connector)

A-Net Expansion :

  • one EtherCon Category 5 (RJ45 connector)

Output Level Settings :

  • Four-position switch, per channel pair;
  • +24dBu, +18dBu, +4dBu, and Mic

Channel LED Indicators :

  • Signal Present and Clip, per channel

Metering :

  • LEDs; green: Signal Present; red: Clip; per channel

Maximum Output Level :

  • +24dBu

Output Impedance :

  • 226 ohms (+18dBu, +24dBu); 100 ohms (+4dBu and mic)

Freq. Response :

  • 4Hz-22kHz +0.2dB/-3dB

THD +N :

  • < 0.004%

Crosstalk :

  • -90dB

Bit Error Rate (BER) :

  • 10(-12)

Signal to Noise (unweighted)   

  • 92dB typical, A/D to D/A
  • Measured from AN-16/i to AN-16/o v.4 Output Module

Digital Connections

  • A-Net In: 1; A-Net Out: 1; A-Net Expansion: 1;
  • Neutrik EtherCon connectors

A-Net Pro16

  • A-Net Expansion combines two A-Net streams (32 channels of audio) onto one Cat-5e cable;
  • uses unshielded Cat-5e UTP (or better) cable

Latency

  • <0.620 msec (measured from analog input to analog output)

Power Supply :

  • External, DC, universal switching type

Input Voltage :

  • 100-240 volts, 50/60Hz, 30VA

Output Voltage :

  • 24 VDC, 0.5 amp
  • Plug Size : 2 mm

Power :

  • 24 VDC, 500mA

Dimensions :

  • 19" (482.6 mm) wide x 5.75" (146 mm) deep;
  • 1U high

Weight :

  • 6.8 lbs. (3.08 kg)

Options :

  • SB4 System Bridge; used to combine up to four A-Net streams for transmission over one Cat-5e cable
SKU AVI-AN16/ov4
Brand Aviom
Weight 6.8000
Dimensions (WxHxD) 19" (482.6 mm) wide x 5.75" (146 mm) deep; 1U high

Write Your Own Review

You're reviewing: Aviom AN-16/o v.4

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Rating

Deal Request

Aviom AN-16/o v.4

$1,360.00

Submit the price you are willing to pay for this item.

You will receive a quick response from our crew.

Or just call us now

(888) 890-6222

Please wait...