• Variable Input Impedance For Flexible Microphone Voicing (150 Ohms To 2400 Ohms)
• Selectable Plate Voltage
• Large VU Meters
• Backlit Function Switches
• Discrete Class-A Input Microphone Preamplifier
• Low Noise at Lower Gain Settings
• Extremely Low Total Harmonic Distortion (THD)
• Wide Frequency Response
• Additional Front Mounted Instrument Input Jack
• Supports Mid/Side Miking Technique
• Operates at +4dbm/-10dbv Output
• Selectable Stereo/Dual Operation of Output Controls
• Automatic Instrument Input Selection

Specifications

Input Impedance
• Mic: 150 to 3.4K Ohms, variable
• Instrument: 2.5M Ohms
• Preamp Insert: .5K Ohms

Output Impedance
• Balanced Output: 600 Ohms balanced
• Unbalanced Output: 300 Ohms
• Insert Outputs: 300 Ohms

Frequency Response
• Analog In to Analog Out: 12Hz to 100KHz +0, -1dB
• THD @ 1 KHz: <0.15% typical
• THD @ to to 20 KHz: <0.033% typical

Equivalent Input Noise
• Mic/Line: -128dBu, Input shortened, Max gain, "A" weighted
• Instrument: -109 dBu, Input shortened, Max gain, "A" weighted

Maximum Input Level
• Mic: +18dBu balanced
• Instrument: +15 dBu

Maximum Gain
• Mic: 70dB (XLR to balanced output)
• Instrument: 64 dB (1/4" to balanced output

Maximum Output Level
• Balanced: +24 dBu
• Unbalanced: +20 dBu
• Output Level At Meter 0 VU: +4 dBu/-10dBV

Preamp
• Microphone Gain: 0 dB to +56 dB
• Instrument Gain: +3 dB to +50 dB
• Low Cut Filter: 0 - 250 Hz, 1-pole, 6 dB/Octave

EQ
• Boost/Cut: +/- 12 dB on each band
• Low Freq. Tuning: 40 / 120 Hz Selectable
• MID 1 Freq. Tuning: 20 Hz to 2 KHz continuously variable
• MID 2 Freq. Tuning: 200 Hz to 20 KHz continuously variable
• High Freq. Tuning: 6 KHz / 18 KHz Selectable

Compressor / Limiter
• Attack Time: 250 uSec. to 100 mSec.
• Release Time: 00 mSec to 3 Sec.
• Compression Ratio: 2:1 to 30:1

• Dimensions (H x W x D - in): 3.5 x 19.0 x 9.2
• Dimensions (cm): 8.9 x 48.3 x 23.3
• Weight (lbs/kg): 11/5
• Power Requirements: USA - 105 to 125 VAC/ 60 Hz
  Export units configured for country of destination.