Product Description for the ADAM Sub10 MkII
The Sub10 MK2 is a powerful subwoofer designed to extend the low frequency capabilities of any near or midfield monitoring system down to 25Hz.
A sturdy special woofer with extended cone travel and a heavy-duty coil have been optimized for accurate reproduction from a bass reflex enclosure. The down-firing bass reflex tube avoids intrusive ventilation noise because of its generous size and shape. The PWM amplifier produces over 90% efficiency and can handle critical passages without overheating for long periods of time. An additional output allows you to cascade as many subwoofers as needed.
The Sub10 MK2 subwoofer provides a precise combination of low cutoff frequency (-3 dB at 25Hz) and an undistorted high sound pressure level (113dB at 1m).
Features
Linear bass reproduction down to 25 Hz
- Ideal addition to nearfield and midfield monitors
Maximum Peak sound pressure in 1 m ≥ 113 dB
- Powerful, compression-free sound reproduction even at very high sound levels
High efficiency PWM amplifier
- Low-distortion amplification at both low and high volume levels
Special 10" woofer with paper diaphragm
- Unrestricted bass reproduction for low-fatigue operation even at high volumes
Easy manual or automatic (de-)activation
- If desired, monitoring is possible without the low frequencies
According to downward working bass reflex tube with generous dimensions and corresponding rounding
- Prevention of air turbulence noise
Upper cut-off frequency is selectable between 50 - 150 Hz
- Allows optimal adaptation of the total system on the bass performance of the satellites
Connectable high-pass filter for the satellite outputs, which blocks signals below 85 Hz
- Dolby- Fair reproduction of film sound
- Discharging the satellites from the low frequencies
Subwoofer
- Number : 1
- Basket Ø : 10" (260 mm)
- Voice coil Ø : 2" (50 mm)
- Cone material : Paper
Built-in Amplifiers
- Subwoofer : 1
- Amp. power RMS / music : 200 W / 300 W
Input connectors
- Analog : XLR / RCA
General data
- Panel : Rear
- Frequency response : 25 Hz - 150 Hz
- THD > 60 Hz : ≤1 %
- Peak SPL max at 1m : ≥113 dB
- Crossover frequencies : 50 - 150 Hz
- Input impedance : 10 KOhm
- Height x Width x Depth : 22" (560 mm) x 12" (300 mm) x 15.5" (400 mm)
SKU | ADM-SUB10MKII |
---|---|
Brand | Adam |
Weight | 15.0000 |
Dimensions (WxHxD) | 12 x 22 x 15.5 |