Product Description for the Adam A7X Pair + Sub10 + MoPADs + Stands + Mogami Cables
2 x ADAM A7X
1 x Adam Audio Sub10 MkII
1 x Auralex MOPAD
2 x Mogami Gold TRS-XLR Male 10' Cables
1 x Ultimate Support JS-MS70 Monitor Stand (Pair)
2 x Mogami Gold Studio 15' Microphone Cables
ADAMs A7 & A7X: the evolution of a legend
The predecessor to the A7X, the A7, became the most famous of all ADAM monitors in a very short time. Not only has it been reviewed over three dozen times with outstanding results, it has also received numerous awards. The A7 quickly gained mass appeal, praised in many of the world’s largest internet forums. Still today, the A7 are the reference monitors in many smaller studios.
With the A7X, ADAM Audio proudly presents the evolution of a legend. It takes everything that made the A7 such an outstanding speaker to a new level.
The first aspect that distinguishes the old from the new model is the X-ART tweeter. The ‘X’ stands for ‘eXtended frequency response’ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has a higher efficiency and higher maximum sound pressure levels.
The perfect integration with the lower frequencies has been achieved with a newly designed 7” midwoofer. It has been redesigned with a much bigger voice coil (1.5”) and is driven by an amplifier with twice the power compared to its predecessor. This combination produces an amazing sound and pressure levels with an almost distortion-free musical reproduction.
Amplifiers / controls
Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the midwoofer is being driven by a 100W PWM amp. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch.
On the rear panel are several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies.
To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.
Adam Audio Sub10 MkII
ADAM Audio subwoofers are designed with one primary goal in mind: Achieving absolute accuracy and an authentic natural sound in the process of music reproduction. This means combining exceptional bass power with precision and clarity in every subwoofer. These elements are the perfect partners to complement the highly acclaimed clarity and transparency of ADAM monitors in the lower and lowest frequencies.
All subwoofers feature both balanced (XLR) and unbalanced (RCA) input/output connectors and comprehensive control options that allow for adapting to different room acoustics and requirements.
Panel / Controls
All subwoofers feature a level control (-60dB to +6dB), phase switch (180°) and a variable upper frequency control (50-150Hz). For the satellite outputs, an 85Hz high pass filter can be switched in to block frequencies below 85Hz so satellite speakers can meet the Dolby recommendations for theater sound and also to relieve the satellites from the lower frequencies. In addition, you can either switch on/off the subwoofer manually or use the option of automatically powering up the subwoofer whenever it receives a signal (‚signal-on/ continuous').
The Sub10 Mk2 is a powerful subwoofer designed to extend the low frequency capabilities of any near or midfield monitoring system down to 25Hz.
A sturdy special woofer with extended cone travel and a heavy-duty coil have been optimized for accurate reproduction from a bass reflex enclosure. The down-firing bass reflex tube avoids intrusive ventilation noise because of its generous size and shape. The PWM amplifier produces over 90% efficiency and can handle critical passages without overheating for long periods of time. An additional output allows you to cascade as many subwoofers as needed.
The Sub10 Mk2 subwoofer provides a precise combination of low cutoff frequency (-3 dB at 25Hz) and an undistorted high sound pressure level (113dB at 1m).
Your loudspeakers are the most critical components you use to verify the quality of your work. No matter how good your mixer, mics, preamps, cables, and other pieces of gear that you've invested in, you're not truly hearing what your recordings sound like until you isolate your monitors from their environment.
This is where the Auralex MoPADs come in. MoPAD Monitor Isolation Pads provide sonic isolation between your monitors and whatever your monitors are resting on, INSTANTLY improving the accuracy of your entire monitoring system.
MoPADs are affordable, easy to implement and really effective at decoupling your monitors from your room and all its contents. You've gotta get some! Until you do, you'll never know what your recordings really sound like.
Mogami Gold TRS-XLR Male 10' Cables
This balanced patch cable with gold-pin/black body ¼" TRS and male XLR connectors is a popular choice for powered speakers. Mogami Gold TRS-XLRM uses Neglex™ Studio Quad cabling, legendary for clarity and freedom from noise/RF interference. Neglex™ type Quad cables are designed for the highest quality recording applications where maximum definition is critical.
Ultimate Support JS-MS70 Monitor Stand (Pair)
If you're just starting out and have smaller studio monitors that you'd like to set on stands, the JS-MS70 is the perfect solution for you! The stable low-profile base can easily be positioned into tight spaces and includes both leveling floor spikes for carpeted areas and rubber feet for hard wood and tile surfaces. The JS-MS70 has four heights from 32.5" to 44.25" and can be securely locked into place with the included locking pin.
Mogami Gold Studio 15' Microphone Cables
The Gold Series uses selected Mogami Neglex "Studio Quad" Oxygen Free Copper cable. This 4-conductor cable actually cancels noise caused by poor ground planes and high RF or electromagnetic fields. The ultra-low-noise spiral shield is the most densely wound available. All this engineering helps cure many of the problems encountered in a project or home studio, creating a much quieter recording environment with vastly improved Dynamic Range.
Virtually every major recording facility in the world is wired with Mogami cable. This means that just about any music you choose has been recorded using Mogami in the audio chain. The Mogami Gold Studio Microphone Cable is famous for unmatched accuracy, extremely low noise and remarkable flexibility. Top engineers rave about its amazing clarity and silent background. If accuracy in reproduction is your goal, this is the cable for you.