0 $0.00

2x ADAM A77X + Ultimate MS-90/45B + Mogami Cables

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

20k-giveaway-rebateblock

2x ADAM A77X + Ultimate MS-90/45B + Mogami Cables

Active Studio Monitor L/R Pair with Ultimate Stands and Premium Cables

Bundle

Regular Price: $2,847.89

Special Price: $2,499.98

Availability: In stock now

"Don't See The Deal You Want?" Request A Deal

  • Google Playstore
  • Apple store

Product Description for the 2x ADAM A77X + Ultimate MS-90/45B + Mogami Cables

Package Includes

1 x ADAM A77X (Left)

1 x ADAM A77X (Right)

2 x Mogami Gold TRS-XLR Male 10' Cables

1 x Ultimate Support MS-90/45B MKII Monitor Stands

ADAM A77X

The A77X is a horizontally designed monitor that combines all of the technical innovations in the AX-Series. Due to its powerful, compression-free sound reproduction and excellent radiation characteristics, it is suitable both for nearfield and midfield monitoring.

The special feature of the A77X is its 2 1⁄2-way system. Both 7” woofers start to work together at 38 Hz and at 400 Hz one woofer fades out and only the second woofer continues to operate in the midrange up to 3 kHz. This prevents interferences and possible phase cancellation in the critical midrange. Even though frequency transitions and potential distortions lie outside these areas, the human ear is particularly sensitive to midrange frequencies.

Especially noteworthy in the A77X is the extremely wide stereo foundation and brilliant stereo imaging. Treble and mids are reproduced with three-dimensional realism and the lows are, as expected from a double woofer design, massive without compromising on precision.

Driver technology

Like all models of the AX series, the A77X features the ADAM proprietary X-ART tweeter. The ‘X’ stands for ‘eXtended frequency response’ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved : the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has higher efficiency and higher maximum sound pressure levels.

The two 7” woofers are identical with that of the A7X. With their large voice coils (1.5”) and powerful amplifiers, they are capable of both very high maximum sound pressure levels as well as very deep registers. The woofers do not cover the same frequency bands : while both of them are responsible for the (sub-) bass frequencies up to about 400Hz, only one of them reproduces the midrange. This prevents interferences between the two drivers.

Amplifiers / controls

Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the bass-/midwoofers are driven by a 100W PWM amp each. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch.

The rear panel features several additional controls : a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies.
To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.

Mogami Gold TRS-XLR Male 10' Cables

This balanced patch cable with gold-pin/black body ¼" TRS and male XLR connectors is a popular choice for powered speakers. Mogami Gold TRS-XLRM uses Neglex™ Studio Quad cabling, legendary for clarity and freedom from noise/RF interference. Neglex™ type Quad cables are designed for the highest quality recording applications where maximum definition is critical.

Ultimate Support MS-90/45B MKII Monitor Stands

The new MS MKII Series studio reference monitor stands from Ultimate Support offer unparalleled innovation and strength for professional, project, and home studios alike. The MS-80 is a desktop monitor stand that features non-slip, high-density acoustic foam and an angle-adjustable base that allows the end user to fine tune the sweet spot. The MS-90 is a column monitor stand that offers internal cable management channels and 6000 Series aluminum construction while the MS-100 is essentially a combination of the two!

MS-90/45B Product Breakdown:

  • Sonic Isolation and Decoupling
  • Three Internal Channels for Cable and Weight Management
  • Ultimate Support Design
  • Available in Two Heights

Sonic Isolation and Decoupling

From top to bottom, all three MS MKII Series stands feature sonic isolation and decoupling components. The MS-90 delivers four non-marring sound decoupling pads that stabilize monitors of varying sizes. The MS-100 and MS-90 feature two rubber couplers between the column and the top/bottom plates and spike decoupling designs under the top and bottom base plates. Add the MS-90 to your studio and discover what you've been missing in your mix!

Three Internal Channels for Cable and Weight Management

The MS-100 and MS-90 offer three internal channels that run the length of the column. So your studio remains clear of untidy cables, two channels are designed for audio and power respectively. For additional stability, the larger third channel can be filled with shot or sand.

Ultimate Support Design

The new MS MKII Series studio monitor stands are made from the highest quality materials, such as Series 6000 aluminum, and backed by award-winning design that marries both form and fashion. The modern studio owner will love the contemporary look while the veteran engineer will appreciate the solid build and tweak-ability.

Available in Two Heights

Depending on the needs of your studio, the MS-90 is available in two studio standard heights: 45" and 36". Both are identical in construction and features except for height. Choose the height that's best for your studio design!

Features

ADAM A77X (Left)

X-ART tweeter, handmade in Berlin            

  • Allows longer operation with fewer signs of fatigue
  • Their breakup is prevented by the folded diaphragms, distortions are effectively reduced to a minimum
  • Advanced dynamic range due to acoustically effective diaphragm surface that is 2.5 times bigger (compared to a classic tweeter according to the piston principle)

The air velocity ratio of 4:1 during the sound generation by folded X-ART membrane

  • Direct, fast response in the high-range even with complex transients

In-phase, simultaneous operation of the woofers below 400 Hz        

  • Dry, unstrained reproduction of the low-range
  • Critical center area is played by a single driver without interference

Ultra-light but extremely dimensionally stable woofer material (Carbon/Rohacell/Glass fiber) 

  • Excellent transient response even at high sound levels without breakup of the diaphragm

Unique, horizontal 2.5-way system with 2 x 7" woofers        

  • Very high resolution of the stereo image and extremely wide stereo base

Spacious bass reflex ports on the front     

  • Bass reproduction with very low compression
  • Allows positioning close to walls

Highly efficient PWM amplifier for the woofer coupled with an A/ B amplifier for X-ART tweeter            

  • Low-distortion amplification at both low and high volume levels

Linear frequency response of 38 Hz to 50 kHz         

  • Unbiased reproduction in a very wide frequency band

Maximum Peak sound pressure per pair in 1 m ≥ 122 dB     

  • Powerful, compression-free sound reproduction even at very high sound levels

Simple, stepless room acoustic adjustments over tweeter gain, low and high shelf filters       

  • Allows optimal adaptation to acoustically difficult listening environments

Analog XLR and RCA inputs          

  • Optimized for balanced and unbalanced line signals

Acoustically optimized cabinet geometry 

  • Reduction of unwanted reflections on the cabinets

Directional sound radiation in vertical plane            

  • Reduction of early reflections on the surfaces of, e.g. mixing consoles, desks, etc.

Volume control and on/off switch on the front         

  • Very easy to use

Suitable for both near- and mid-field applications  

  • Enough headroom for different studio environments

Woofer

  • Number : 1 / 1
  • Basket Ø : 7" (175 mm) / 7" (175 mm)
  • Voice coil Ø : 1.5" (38 mm) / 1.5" (38 mm)
  • Cone material : Carbon / rohacell / glass / Carbon / rohacell / glass

Tweeter

  • Number : 1
  • Type : X-ART
  • Diaphragm area : 4 inch² (2420 mm²)
  • Equiv. Diaphragm Ø : 2" (56 mm)
  • Velocity transform ratio : 4:1
  • Diaphragm weight : 0.17 g

Built-in Amplifiers

  • Subwoofer : 1
  • Type : PWM
  • Amp. power RMS / music : 100 W / 150 W
  • Subwoofer : 1
  • Type : PWM
  • Amp. power RMS / music : 100 W / 150 W
  • Tweeter : 1
  • Type : A/B
  • Amp. power RMS / music : 50 W / 75 W

Control Panel

  • Input Sensitivity : -∞ to +14 dB
  • High shelve > 5 kHz : ±6 dB
  • Low shelve < 300 Hz : ±6 dB
  • Tweeter gain : ±4 dB

Input Connectors

  • Analog : XLR / RCA
  • Location : Rear

General Data

  • Panel : Front
  • Frequency response : 38 Hz - 50 kHz
  • THD 90dB/1m > 100 Hz : ≤0.5 %
  • Long term output : ≥114 dB
  • Max. peak : ≥122 dB
  • Crossover frequencies : 400 / 3000 Hz
  • Input impedance : 30 KOhm
  • Magnetically shielded : Optional
  • Height x Width x Depth : 9.5" (235 mm) x 21" (530 mm) x 11" (280 mm)

ADAM A77X (Right)

Woofer

  • Number : 1 / 1
  • Basket Ø : 7" (175 mm) / 7" (175 mm)
  • Voice coil Ø : 1.5" (38 mm) / 1.5" (38 mm)
  • Cone material : Carbon / rohacell / glass / Carbon / rohacell / glass

Tweeter

  • Number : 1
  • Type : X-ART
  • Diaphragm area : 4 inch² (2420 mm²)
  • Equiv. Diaphragm Ø : 2" (56 mm)
  • Velocity transform ratio : 4:1
  • Diaphragm weight : 0.17 g

Built-in Amplifiers

  • Subwoofer : 1
  • Type : PWM
  • Amp. power RMS / music : 100 W / 150 W
  • Subwoofer : 1
  • Type : PWM
  • Amp. power RMS / music : 100 W / 150 W
  • Tweeter : 1
  • Type : A/B
  • Amp. power RMS / music : 50 W / 75 W

Control Panel

  • Input Sensitivity : -∞ to +14 dB
  • High shelve > 5 kHz : ±6 dB
  • Low shelve < 300 Hz : ±6 dB
  • Tweeter gain : ±4 dB

Input Connectors

  • Analog : XLR / RCA
  • Location : Rear

General Data

  • Panel : Front
  • Frequency response : 38 Hz - 50 kHz
  • THD 90dB/1m > 100 Hz : ≤0.5 %
  • Long term output : ≥114 dB
  • Max. peak : ≥122 dB
  • Crossover frequencies : 400 / 3000 Hz
  • Input impedance : 30 KOhm
  • Magnetically shielded : Optional
  • Height x Width x Depth : 9.5" (235 mm) x 21" (530 mm) x 11" (280 mm)

Mogami Gold TRS-XLR Male 10' Cables

  • The finest patch cable you can buy for neutral tone and noise rejection
  • Conductor insulation is XLPE (Cross-Linked Polyethylene) for excellent sonic clarity
  • Mogami Signature Ultra High Density Spiral Pure Copper Shield for superior sound quality and silent background
  • A perfect choice for high end audio equipment

Ultimate Support MS-90/45B MKII Monitor Stands

  • Product Name : MS-90/45B
  • Part Number : 17449
  • Color: Black with Black Accents
  • Capacity : 75 lbs. (34 kg)
  • Height : 45" (1145mm)
  • Top Plate : 12" x 10.25" (305mm - 260mm)
  • Base Diameter : 19" (483mm)
SKU ADM-A77X-BUN3
Brand Adam
Weight 104.0000
Dimensions (WxHxD) No

.

Deal Request

2x ADAM A77X + Ultimate MS-90/45B + Mogami Cables

$2,847.89

Submit the price you are willing to pay for this item.

You will receive a quick response from our crew.

Or just call us now

(888) 890-6222

Please wait...

Continue shopping
View cart & checkout
  • Loading,Please wait...

    PayPal Checkout
Continue shopping
View cart & checkout